Safe Jack 12-Ton Bottle Jack Flat Pad

Enhance lifting safety with the Safe Jack Flat Bottle Jack Lift Pad. Adding this 4-inch x 3-inch Lift Pad to the top of your bottle jack results in a significant pressure reduction, offering greater security, and the ample pad size significantly reduces the risk of slipping or tipping. When combined with our Extension Screw Collars, the easy slip-on design of our Lift Pads stacks seamlessly atop our Bottle Jack Extensions or the jack itself.
Safe Jack utilizes the Extension Screw Collar to create a secure engagement for the Extensions and Lift Pads, as well as to maximize the available stroke to an additional 1.5 inches. These premade Extension Screw Collars are measured specifically for the bottle jack brands we carry. If you have your own bottle jack you wish to use instead, you may need to purchase a Custom Extension Screw Collar. If you opt out of purchasing a Custom Extension Screw Collar altogether, the adapters may still work, but you will not achieve the additional 1.5 inches of stroke. The 12-ton adapters will fit over a bottle jack saddle diameter of 1.25 inches - 1.75 inches (31.75 mm - 44.45 mm.) If the hydraulic cylinder (ram) is significantly smaller than this, we advise against using the adapters without an Extension Screw Collar, as the point of engagement will be unstable.

Features
Fits over bottle jacks with 1.25 inches - 1.75 inches (31.75 mm - 44.45 mm) diameter saddle
4-inch x 3-inch (101.6 mm x 76.2 mm) surface area
Use on any flat surface
2 inches of internal engagement
Steel construction
Durable powder coat finish
Compatible with most bottle jacks
Numerous stacking combinations with other Safe Jack Extensions & Lift Pads
Made in the USA

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov