Maximus-3 Front Track Bar and High Steer Bracket for 3 to 4.50-Inch Lift; Black (18-26 Jeep Wrangler JL)Find parts that fit my vehicle

OVERVIEW
Maximus-3 JL Front Track Bar & High Steer Bracket significantly improves handling and steering precision by repositioning the front track bar and draglink mount locations on the axle. This corrects the roll center height of the front suspension and brings steering geometry back to factory alignment. The result is reduced body roll and eliminated bump steer.
Please note:
This kit must be used in combination with a flipped draglink. We recommend the STEERSMARTS JL YETI XD DRAGLINK TOP-MOUNT

KEY FEATURES & TECHNICAL SPECS
Improves handling and steering precision by correcting steering geometry.
Improves ground clearance by use of flipped draglink.
Corrects the operating angle of the front track bar
Reduces wear and tear on the front track bar bushings in a lifted application.
Robust compact design with boxed welded construction for added strength.
Bolts to factory mounting points on the axle housing (bolt-on install with no drilling or cutting required).
MATERIAL: ¼” GA High Strength Low Alloy Steel - Flat laser, press brake, welding
SURFACE FINISH: Multi-layer coating: zinc plating & powder coat
ADDED WEIGHT: ? Lb. (approx.)
MADE IN: USA

INSTALLATION
Estimated Installation Time: 2 Hours
Installation Difficulty Level: Advanced

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov