Mammoth 2-Inch Suspension Lift Kit with FOX Shocks (18-26 Jeep Wrangler JL, Excluding Rubicon 392)Find parts that fit my vehicle

Go Off-Road. Going off-road can be tough for your JL Wrangler’s stock suspension, that's why you need a lift kit that was specifically designed to take on the great outdoors. Luckily, this Mammoth 2-Inch Suspension Lift Kit has what you need to help you take on the obstacles found on and off-road. With 2 inches of lift, this kit can accommodate tires up to 34-inches in size. This Mammoth Kit features tubular lower control arms as well as linear coil springs, bump stops and sway bar end links. What’s more, the included monotube Fox shock absorbers will provide a highly comfortable ride, even when tested across rough terrain.

FOX Performance Series 2.0 IFP Monotube Shocks. Featuring a 5/8-inch hard chrome plated heat-treated alloy steel shaft, this FOX Shock has a 2-inch diameter CNC machined 6061-T6 shock body that allows for increased cooling capacity. The Internal Floating Piston (IFP) mono-tube design separates the JM92 shock oil from the high-pressure, nitrogen-charged gas chamber to eliminate oil aeration allowing for maximum performance. The Shock is completed in durable, clear-anodized finish for impressive good looks and long lasting durability.

Coil Springs. The front and rear coil springs included in this Mammoth 2-inch Suspension Lift Kit have been engineered to work perfectly in conjunction with the other components of the kit. These springs will not only aid in lifting your Wrangler for increased clearance, but they will also help to provide a smooth comfortable ride. These linear coil springs feature a spring rate of 125 pounds front and 175 pounds rear.

Tubular Lower Control Arms. Mammoth includes a set replacement lower control arms in their 2-inch Suspension Lift Kit. These control arms feature a tubular steel design for light weight and superior strength. A new set of greaseable Heim joints are included for greater range of motion.

Bump Stops. The Front Bump Stop Blocks included in this Mammoth Kit are machined from aluminum for superior strength and extra rigidity. Where the Rear Bump Stop Extensions have been fabricated from high grade steel. The both components are then completed in a durable black finish for long lasting corrosion resistance, regardless of the elements they are exposed to.

Sway Bar End Links. The included front and rear Sway Bar End Links were designed to work with the new lifted ride height of this Kit. Manufactured from steel these, Sway Bar End Links feature high-density polyurethane bushings which are much more durable than the original stock rubber units to provide years of trouble free driving. Short end links are for the front. Long end links are for the rear.

Installation. Mammoth engineered their Lift Kit to be installed with no welding or cutting needed, making it a bolt-on kit. However, professional installation is recommended. With all the necessary hardware included, this Lift kit can be installed in about 6 hours time.

Application. This Mammoth 2-Inch Suspension Lift Kit with Fox Shocks is designed to fit 2018-2026 Jeep Wrangler JL excluding Rubicon 392 models.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov