Belltech 2.50-Inch Front Strut Spacers (20-24 Jeep Gladiator JT)

Levels Vehicle Stance. Use Belltech’s Leveling Kit to improve your Gladiator’s nose-down stance and raise the front end by 2.5 Inches. With the added front ground clearance you’ll have a less likely chance of bottoming out when off-roading, and as a result, less chances of causing damage to your underside components. The higher driving position is an extra bonus as well, not just when off-roading, but in daily driving too.

Fit Bigger Tires. The added 2.5 Inches of front lift allow you to fit larger tires without needing to cut the fenders. This kit will clear 37 Inch tires with a maximum wheel back space of 4.5 Inches. It’s an easy and affordable way of fitting a more aggressive wheel and tire combo to your Gladiator without spending hundreds or even thousands of dollars on a full lift kit.

Plug-and-Play Setup. Installing the spacers is easy as it requires no welding or cutting. If you’re somewhat mechanically inclined and have a basic set of hand tools, you should be able to install this kit. Installation time according to the manual is 4 to 5 hours without the necessary alignment you’ll need afterwards. Installation instructions are included with the kit.

Limited Lifetime Warranty. This product comes with Belltech’s Lifetime Limited Warranty. For more information about the product or its warranty please contact customer support.

Application. The Belltech 2 Inch Front Strut Spacers are designed to fit all 2020-2024 Jeep Gladiator JT 4WD Models, including the Rubicon.

Fitment:

• 2020 Jeep Gladiator
• 2021 Jeep Gladiator
• 2022 Jeep Gladiator
• 2023 Jeep Gladiator
• 2024 Jeep Gladiator

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov