Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Artec Industries 1-Ton Rear 14-Bolt Swap Kit (07-18 Jeep Wrangler JK)

Item J126259
ExtremeTerrain no longer carries the Artec Industries 1-Ton Rear 14-Bolt Swap Kit (07-18 Jeep Wrangler JK). Please check out Jeep CJ7 Axles & Hubs (1976-1986) for an updated selection.
Verify parts fit and get product recommendations.
Wrangler Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Complete Rear Axle Swap Kit
    • Provide Superior Mounting Support for Your Axle
    • Retains Factory Mounting Positions
    • Works with Aftermarket Lift Kits
    • Brackets Included
    • Durable Steel Construction
    • Pre-Jigged Brackets
    • Low Profile Design
    • Advanced Installation – Mechanical Expertise Needed
    • Fits 2007-2018 Jeep Wrangler TJ Models

    Description

    One-Ton Support and Power. So your 2007-2018 Jeep Wrangler JK is going to get a beefier rear axle put in. You’re going to need a swap kit that can not only support it, but keep it performing perfectly. And the Artec Industries 1 Ton Rear 14 Bolt Swap Kit is designed to fit the rear axle and hold up to whatever trouble your Jeep can get into.

    High-Quality Construction. This swap kit is constructed from super-durable, quarter-inch steel that can take the damage and wear and tear as you go. This is designed to fit 14 bolt axles and is given a low-profile design to keep its size down, so you can mount the axle much more simply.

    This Truss is Best Truss. The truss on this swap kit is designed to fit easily and save you time. With some quick tack welds, you can mount this in place with all of the brackets in exactly the right spot. There’s no guesswork needed, just put this in once they’ve been set. It’s going to be a good fit, guaranteed, no matter if your JK has a factory suspension or a custom suspension lift.

    Installation. This swap kit is a very mechanically-advanced installation, requiring specialized welding and fabrication expertise. It will take about a day if doing it yourself. Please have this installed professionally if you lack the tools or expertise to put this in.

    Application. This Artec Industries 1 Ton Rear 14 Bolt Swap Kit is designed to fit all 2007-2018 Jeep Wrangler JK models. Please ensure correct model before purchase.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Main Truss Top
    • (1) Long Truss Gusset
    • (2) Small Truss Gussets
    • (1) Medium Truss Gusset
    • (1) Upper Control Arm Mount (solo)
    • (1) Upper Control Arm / Trackbar Side
    • (1) Upper Control Arm / Gusset Side
    • (1) Main Trackbar Bracket
    • (2) Anti-Sway Bar Mounts
    • (2) Coil Spring Bottom Plate
    • (2) Tubes for Coil Plate
    • (2) Tube Top With Bolt Hole
    • (2) Coil Retained With Bolt Hole
    • (2) Coil Retainer With Bolt Hole
    • (2) LCA Mount (Passenger and Driver Side)
    • (2) Shock Mounts (Passenger and Driver Side)
    • (2) Coil Plate Gussets
    • (2) .50-Inch Bolts and Locking Nuts
    5.0

    Customer Reviews (1)

      Brand Image

      Reviews of Artec Industries Drivetrain products have an average rating of 4.8 out of 5

        Questions & Answers

        10 More Questions

            Related Wrangler Categories