Westcott Designs 3-Inch Front PreLoad Collar Lift Kit; Black Anodized (07-21 Tundra w/ TRD Off-Road Package)

Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA._x000D_\n_x000D_\n*Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18._x000D_\n_x000D_\nThis kit provides the following lift:_x000D_\n

_x000D_\n
• 2007-2021 Tundra TRD Off-Road: 3” (front lift)
_x000D_\n

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov