Westcott Designs 3-Inch Front PreLoad Collar Lift Kit; Black Anodized (07-21 Tundra SR5)

Westcott Designs Tundra SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire*  The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA._x000D_\n_x000D_\n*Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18._x000D_\n_x000D_\nThis kit provides the following lift:_x000D_\n

_x000D_\n
• 2007-'21 Tundra SR5: 3” (front lift)
_x000D_\n

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov