Westcott Designs 3-Inch Front / 1-Inch Rear PreLoad Collar Lift Kit; Raw Aluminum (18-21 Tundra SR5 w/ TRD Sport Package)Find parts that fit my vehicle

2007-2021 Westcott Designs Tundra TRD Sport preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA._x000D_\n_x000D_\n*Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18._x000D_\n_x000D_\nThis kit provides the following lift:_x000D_\n

_x000D_\n
• 2007-2021 Tundra TRD Sport: 3” (front lift) and 1" (rear lift)
_x000D_\n

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov