Safe Jack Talon Oil Filter Tool

The TALON OIL FILTER TOOL has undergone significant reinvention and enhancement! Over the years, the 10M-TALON oil filter tool has evolved to meet the increasing demands of our customers. The latest iteration, the NEW TALON, is not only our most robust but also the most compact. Simply attach the NEW TALON to a 3/8 drive extension and ratchet, and it will effortlessly get the job done.
The TALON Oil Filter Tool was meticulously designed to tackle stubbornly stuck oil filters. Bogert Aviation prioritized safety in confined spaces, ensuring that it remains secure and minimizes the risk of damaging nearby components. Although this task can still be a messy one, the TALON Oil Filter Tool presents your best chance of removing stubborn filters without causing any additional damage. Don't cuss... Call us!
Comes with #10 (0.194) and 6MM (0.236) screws.

Features
Three-pin (TALON) engagement in oil filter plate for stability and strength
Up to 1500 in. lbs. of torque
Works in tight spaces
Works on aircraft, automotive, marine, and recreational vehicle applications
Made in the USA

Benefits
Much easier than trying to remove a stuck filter by other methods
Saves you time and money

Instructions
Open the filter can and remove the filter element. If necessary, cut or tear open the filter can wherever it is accessible, gaining access to the filter element.
Use the new filter as a guide. Set the pin positions on the 10M-TALON Oil Filter Tool to fit into the oil holes in the oil filter plate.
Insert the Oil Filter Tool into the stuck filter can using a 3/8" ratchet extension and ratchet wrench. Engage the oil holes in the filter plate with the pins of the oil filter tool.
Turn counterclockwise to loosen the filter.

Size
Adjustable down to 1.10" in three-prong mode for smaller oil filters
Adjustable down to .95" in two-prong mode for smaller oil filters
Adjustable up to 3.14" for larger oil filters

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov