Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Rubicon Express 3.50 to 4.50-Inch Standard Coil Suspension Lift Kit with Twin-Tube Shocks (18-23 Jeep Wrangler JL 4-Door)

Item J131211-JL
ExtremeTerrain no longer carries the Rubicon Express 3.50 to 4.50-Inch Standard Coil Suspension Lift Kit with Twin-Tube Shocks (18-23 Jeep Wrangler JL 4-Door). Please check out Jeep CJ7 Lift Kits 4-4.75" (1976-1986) for an updated selection.
Verify parts fit and get product recommendations.
Wrangler Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Standard Coil Suspension Lift Kit
    • Increases Ground Clearance by 3.5 to 4.5 Inches
    • Improves Off-Road Capabilities
    • Includes Twin-Tube Shocks
    • Comes With Front and Rear Lifted Coil Springs
    • Includes a Rear Track Bar Bracket and Extended Sway Bar End Links
    • With a Complete Set of Front Bump Stops and Rear Bump Stop Pads
    • Includes Front Alignment Washers for Caster Adjustment
    • Accommodates Up to 35-Inch Tires
    • Direct, No-Weld Installation
    • Comes With a Limited Lifetime Warranty
    • Fits 2018-2023 Jeep Wrangler JL 4 Door Models

    Description

    Boost Your Jeep’s Off-Road Performance. Give your Jeep a performance boost and conquer the trails with ease by installing this Rubicon Express 3.5-4.5 Inch Standard Coil Suspension Lift Kit With Twin-Tube Shocks. This kit can give your Jeep up to 3.5-4.5 inches of added height, creating enough room for up to 35-inch tires and getting your undercarriage out of the way of minor obstacles. The kit also comes with twin-tube shocks for enhanced driving comfort, a rear track bar bracket for improved handling and vehicle balance, and a set of front and rear bump stops to help protect your suspension from nasty hits when you bottom out.

    Front and Rear Twin-Tube Shocks. Twin-tube shocks provide your Jeep with a smoother driving experience. All without sacrificing a wide range of control and handling performance. Twin-tube shocks also prevent shock fluids from foaming, which reduces fading, noise, tire bounce, and overall roughness.

    Front and Rear Lifted Coil Springs. This suspension lift kit comes with front and rear coil springs that lift your Jeep by 3.5 to 4.5 inches. This is enough to give you room for larger tires and at the same time experience a more comfortable ride even when driving on bumpy roads. The added height also helps protect your Jeep’s undercarriage from getting bumped or scraped by small obstacles, debris, and other hazards.

    Rear Track Bar Bracket. The main purpose of the rear track bar bracket is to restore your Jeep’s proper roll center. This reduces rear body roll, keeps your vehicle balanced, and prevents wobbling of your chassis and suspension components, no matter if you’re driving fast or slow. In addition, the rear track bar bracket also helps improve steering response.

    Complete Set of Bump Stops. There are times when your Jeep will bottom out or hit the ground a little too hard. When this happens, your suspension is in danger of getting damaged. The front bump stops and rear bump stop pads that come with this lift kit will help protect your suspension from getting damaged by absorbing the excess energy from over-compression.

    Extended Sway Bar End Links. Apart from the rear track bar bracket, this lift kit also comes with other components that help keep your Jeep balanced and steady: the extended sway bar end links. With these end links, you will notice the significant reduction in body roll especially when you take sharp turns or drive over obstacles.

    Front Alignment Washers. To make sure that your wheels are properly aligned, this lift kit also comes with a set of front alignment washers. These parts help with the proper positioning of the caster, which helps align the wheels and gives you better high-speed stability.

    Direct, Bolt-On Installation. This suspension lift kit is engineered for a direct, no-weld installation. Using the recommended tools and the enclosed mounting hardware, complete installation can be accomplished in approximately 5 hours. Note that alignment is required after installing this suspension lift kit.

    With a Limited Lifetime Warranty. Rubicon Express suspension lift kits all come with a limited lifetime warranty. This covers any defects on the workmanship and materials. For more information about the terms and conditions, you may get in touch directly with the manufacturer.

    Application. This Rubicon Express 3.5-4.5 Inch Standard Coil Suspension Lift Kit With Twin-Tube Shocks is compatible with 2018-2023 Jeep Wrangler JL 4 Door Models.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (2) Front Coil Springs
    • (2) Rear Coil Springs
    • (2) Front Twin-Tube Shocks
    • (2) Rear Twin-Tube Shocks
    • (1) Rear Track Bar Bracket
    • (1) Sway Bar End Links Set
    • (1) Front Bump Stops Set
    • (1) Rear Bump Stop Pads Set
    • (1) Front Alignment Washers Set
    • Mounting Hardware
    • Installation Instructions
    4.6

    Customer Reviews (97)

      Questions & Answers

      10 More Questions