Rock Krawler 2.50-Inch Starter Suspension Lift Kit with Bilstein 5100 Shocks (18-26 Jeep Wrangler JL 2-Door)Find parts that fit my vehicle

Rock Krawler 2.5" Starter System for Jeep Wrangler JL (Gas Models)
The Rock Krawler 2.5" Starter System is the introduction to a what could evolve into a full RK Suspension system. This kit gives you the minimum you must have in geometry correction when adding taller lift springs for your Wrangler. You will experience an excellent highway/around the town ride due to our triple rate coils. You will have enough coil length to flex out on a trail without unseating a coil spring. The fixed high clearance front lower control arms will correct the caster and front axle position for proper drive-ability. Coil spring bow and vehicle lean is also addressed in this Starter System at a very friendly budgeted price. When we design a system, our goal is to provide you with the most comprehensive solution and the best geometry, install exceptional value, and be the foundation for every adventure whether it be on the Street or down a Trail! Rock Krawler Suspension is the best place to start your Wrangler build.

System Benefits:
Complete Bolt In System
Excellent Highway Ride
Improved Off-Road Ability
Allows for 35” – 37” Tall Tires
Triple Rate Front & Rear Coil Springs
Caster Correction
Coil Spring Bow Correction
Vehicle Lean Correction
Upgradeable to Any Other System
Lifetime Warranty Coverage

System Includes:
(4) Triple-rate Coil Springs
(2) High Clearance Front Lower Control Arms made from 1.5” Solid Alloy Steel with Adventure Series Joints
(6) Coil Spring Correction Seats
Bolt on Rear Track Bar Bracket made from ¼” Thick Laser Cut Steel
(DEPENDING ON SHOCK PACKAGE CHOSEN)
Bump Stops Are Included with All Shock Options
IF YOU CHOOSE NO SHOCKS - BUMPSTOPS CAN BE PURCHASED SEPARATELY - RK07124

Shock Information:
All RRD Shocks and Coilovers are Designed and Built in-house
Generic Front Shock Length – 16.8” Collapsed/ 27.3” Maximum Extended
Generic Rear Shock Length – 17.8” Collapsed/ 29.31” Maximum Extended
Bilstein 5100 Shocks
A Great Pairing with Our Multi-rate Coil Springs
Maintenance Free
RRD 2.25" IFP Shocks
2.25” O.D. Military Grade Hard Anodized Fluted Aluminum Shock Body
Cooling Surface Area of a 2.5” Shock
3/4” 17-4 PH Stainless Steel, Hard Chrome Plated and Polished Shaft
Billet Aluminum Valve Circuit and Components
Dual DU Shaft Bearings and Double Redundant Sealing Methods
Built in-house
Serviceable/Rebuildable/Revalveable
More Info

Wheel Fitment:
Sport and Sahara Wheel Fitment Recommendations
37”/38” Tall Tires - Recommend 3.5” of Back Spacing
Rubicon Fitment Recommendations
37” Tall Tires – Recommend 4.5” of Back Spacing
40” Tall Tires – Recommend 3.5” of Back Spacing

Tire Fitment:
Sport and Sahara with Full OEM Fenders
37” Tall Tires (3” Bump Stop Height Recommended)
Sport and Sahara with Trimmed or High Lined OEM Fenders
38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
37”/38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Trimmed or High Lined OEM Fenders
40” Tall Tires (3” Bump Stop Height Recommended)

General Notes:
All lift heights based on Rubicon models for standard style build (i.e. front bumper and winch, rear bumper and full size spare).
Recommend adding a front adjustable track bar (RK06187HD)

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov