Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>

3-Inch 2-Arm Suspension Lift Kit (07-18 Jeep Wrangler JK 2-Door)

Item J131290
ExtremeTerrain no longer carries the 3-Inch 2-Arm Suspension Lift Kit (07-18 Jeep Wrangler JK 2-Door). Please check out Jeep CJ7 Lift Kits 3-3.75" (1976-1986) for an updated selection.
3-Inch 2-Arm Suspension Lift Kit (07-18 Jeep Wrangler JK 2-Door)
Verify parts fit and get product recommendations.
Wrangler Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Q&A, Specs & Installation

    Features

    • Increases Ground Clearance and Improves Articulation
    • Lifted Coil Springs
    • Front Lower Adjustable Control Arms
    • Tubular Steel Construction
    • Black Powder Coated Finish
    • Greasable Heim Joints
    • Direct Bolt-On Replacement
    • Track Bar and Brake Line Relocation Brackets Included
    • Shocks are Not Included
    • Fits 2007-2018 Jeep Wrangler JK 2-Door Models

    Description

    Increases Lift, Improves Articulation. An excellent way to increase the ground clearance and articulation of your 2007-2018 2-door Jeep JK is by installing a Road Less Traveled (RLT) 3.0-inch 2-Arm Suspension Lift Kit. Raising your JK's suspension by 3.0 inches front and rear for an aggressive off-road stance, this RLT Kit includes adjustable front lower control arms that are equipped with Heim Joints for maximize articulation. This RLT Suspension Lift and Control Arm Kit was designed with adventurous off-roader in mind.

    Lifted Coil Springs. The front and rear coil springs included in this RLT 3.0-inch Suspension Lift Kit have been engineered to work perfectly in conjunction with the other components of the kit. These springs will not only aid in lifting your Wrangler for increased clearance, but they will also help to provide a smooth comfortable ride.

    Single On-Car Adjustable. Unlike some other aftermarket control arm kits that are fixed, the included RLT Front Lower Control Arms are single on-car adjustable. This allows you to precisely dial in your suspension settings, specific for your lift/application, to ensure you stay safely on the road or the trail.

    Durable Construction. Road Less Traveled manufactures their Front Lower Controls Arms from heavy duty steel tubing for superior strength and rigidity. The Arms are completed in a black powder coated finish for durability and long lasting corrosion resistance. RLT's Control Arms come complete with zinc coated heim joints that are greasable to eliminate binding.

    Straight Forward Installation. RLT designed their 3.0-inch Suspension Lift Kit with Adjustable Front Lower Control Arms to be installed with some cutting and drilling being required. This Lift kit can be installed in about 4-5 hours time by using a combination of new and original hardware. Please note that 2012-2018 Jeep JK models may require a RLT Exhaust Spacer Kit part# J106226 in order to clear stock front drive shaft. The Arms will need to be adjusted to the proper pinion angle for your specific lift. An alignment is highly recommended after installation.

    Application. This Road Less Traveled 3.0-inch 2-Arm Suspension Lift Kit is specifically designed for use on 2007-2018 Jeep Wrangler JK 2-door models. Shocks are not included.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Track Bar Relocation Bracket
    • (1) Track Bar Crush Sleeve
    • (1) Stabilizer Shock Relocation Bracket
    • (3) 3/8-inch x 1 1/4” Bolts
    • (3) 3/8-inch Washers
    • (3) 3/8-inch Lock Nuts
    • (1) U-Bolt with washers and Nuts
    • (1) 14mm x 80mm Bolt
    • (1) 14mm Washer
    • (1) 14mm Lock Nut
    • (1) Pitman Arm
    • (2) Front Springs
    • (2) Eccentric Lower Control Arm Bolts
    • (2) Relocation Brackets
    • (2) 1/4-inch x 1-inch Bolts
    • (4) 1/4-inch Washers
    • (2) 1/4-inch Lock Nuts
    • (2) Front Lower Control Arms
    • (1) Track Bar Relocation Bracket
    • (1) Track Bar Crush Sleeve
    • (3) 3/8-inch x 1-inch Bolts
    • (3) 3/8-inch Washers
    • (3) 3/8-inch Lock Nuts
    • (1) 14mm x 80mm Bolt
    • (1) 14mm x 75mm Bolt
    • (2) 14mm Washer
    • (2) 14mm Lock Nut
    • (2) Coil Spring Seats
    • (2) Rear Springs
    • (2) End Links
    • (4) Sleeves
    • (2) Relocation Brackets
    • (2) 1/4-inch x 1-inch Bolts
    • (4) 1/4-inch Washers
    • (2) 1/4-inch Lock Nuts

    Questions & Answers

    10 More Questions