Motobilt Rear Coil-Over Mounts (07-18 Jeep Wrangler JK 4-Door)Find parts that fit my vehicle

You notice it when the rear suspension finally clears its own path. The shocks stand where they should, travel is usable, and nothing feels forced as the axle moves.
The factory rear shock layout and crossmember limit what the suspension can do. This kit replaces those limits with structure that supports real shock length and proper placement without redesigning the entire rear of the Jeep.
Fabricated steel shock towers are tied together with a larger 1/4 inch steel crossmember that replaces the factory unit. Shocks mount on top of the axle and cycle cleanly through their travel. The result is consistent motion, better control, and room for the suspension to work the way it was intended.
Rear coilover mount system for Jeep JKU
Works with 14 inch or 16 inch coilovers or ORI struts when mounted on top of the axle
Replaces the factory crossmember with a 1/4 inch steel crossmember tied into the shock towers
Compatible with Motobilt rear mounted fuel cell or factory fuel tank
Works with standard Jeep JK 3 link rear suspension setups
Pass throughs for clean wiring and fuel management
Cutting and welding are required. The builder friendly design allows installation with basic power tools including a sawzall, cutoff wheel, and welder. Detailed instructions are included to guide placement and fitment.
When the rear suspension has the structure to support real travel, the Jeep stops working around limitations and starts working as a system.
Fits:
2008-2018 Jeep Wrangler JKU

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov