Motobilt 10-Inch Stretch Rear Shock Towers (07-18 Jeep Wrangler JK)Find parts that fit my vehicle

When you stretch the rear of a JK, the factory structure runs out of room fast.
The MB1580 Rear Stretch Towers are built to give the suspension the space and strength it actually needs. Designed to support up to a 3.0 16 inch coilover, these towers allow proper shock placement without compromising link geometry or stuffing the shock into weak factory sheet metal.
The system replaces the factory rear suspension crossmember with a new 3/16 inch steel crossmember engineered with built in link clearance. This creates the room necessary for a rear 3 link suspension to cycle properly without fighting the chassis.
RockJock sway bar brackets are included and designed to relocate the sway bar to a new frame position that works with the stretched layout. The towers are designed to work with the MB5099 Tomahawk Fuel Cell or a rear seat location fuel tank configuration, keeping the rear packaging clean and functional.
This is not a cosmetic upgrade. It is structural reconfiguration for builders who are serious about rear suspension performance.

Important Information
Welding required. Towers and crossmember must be welded to the factory frame.
Ships bare steel. Parts must be prepped and painted or coated prior to final assembly.
Designed to work only with MB5099 Tomahawk Fuel Cell or a fuel tank relocated to the rear seat location.
Minimal exhaust modification will be required.
Intended for experienced fabricators.

Product Specifications
Fits Jeep Wrangler JK
Designed for rear stretch applications
Supports up to 3.0 inch body 16 inch travel coilovers
Includes RockJock sway bar relocation brackets
Replaces factory rear suspension crossmember
New crossmember constructed from 3/16 inch steel
Compatible with rear 3 link suspension
Uses MB5551 tower covers

Notes
Exhaust modification requirements may vary depending on current exhaust configuration.
Additional suspension components may be required depending on overall rear stretch setup.
Final shock fitment and travel clearance will depend on axle width, wheel backspacing, and link geometry.
Recommended to mock up full suspension at ride height and full bump prior to final welding.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov