Max Trac 1-Inch Rear Lift Blocks (07-21 2WD Tundra)

Increased Ride Height. Lift blocks are arguably the easiest and most affordable way to give your truck a mild lift and have it behave exactly like OEM. These rear lift blocks from Max Trac will give your Tundra an increase in rear ride height of 1 Inch, enabling you to fit larger tires. The added ground clearance means you’ll be less likely to bottom out or scrape as well. Even though it doesn’t sound like a lot, the extra inch could come in handy especially when traversing rocky sections or coming down a hill with a steep departure angle. These lift blocks are a perfect match for Max Trac’s leveling kits or lifted spindles, both of which are sold separately.

Premium Materials and Construction. Featuring a ductile iron construction, these lift blocks are durable and rigid, giving you OEM levels of reliability and longevity. Ductile iron has flexible and elastic qualities too though, offering ride quality that’s identical to stock. You won’t notice any difference in terms of comfort or on-road driving characteristics.

Built with Drivability in Mind. To minimize power loss and vibration, the pinion centerline and the transmission centerline need to be parallel. When you lower or raise a vehicle, you’re effectively changing its pinion angle, affecting the way it behaves under acceleration. These Max Trac rear lift blocks were angled for pinion correct from the factory, addressing this specific issue.

Simple Installation. As far as lift kits go, there’s nothing easier than installing a set of rear lift blocks. You don’t have to swap out any shocks, springs, or control arms. It’s a simple bolt-on installation, requiring no welding, cutting, or drilling. It’s a job that should take you 2 to 4 hours, depending on your specific DIY skills.

Lifetime Limited Warranty. This product comes with Max Trac’s Limited Lifetime Warranty. If you have any questions about the product or its warranty, please contact customer support.

Application. These Max Trac Rear Lift Blocks fit 2007-2021 Toyota Tundra 2WD Models.

Application Note. This kit does not come with U-bolts. If you need them, you will have to purchase them separately. If you do, just note that you’ll need longer U-bolts than usual since the blocks are taller.

Fitment:

• 2007 Toyota Tundra
• 2008 Toyota Tundra
• 2009 Toyota Tundra
• 2010 Toyota Tundra
• 2011 Toyota Tundra
• 2012 Toyota Tundra
• 2013 Toyota Tundra
• 2014 Toyota Tundra
• 2015 Toyota Tundra
• 2016 Toyota Tundra
• 2017 Toyota Tundra
• 2018 Toyota Tundra
• 2019 Toyota Tundra
• 2020 Toyota Tundra
• 2021 Toyota Tundra

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov