Logo Image
Black Friday is Here! Shop All Deals >
Get $80 Off Redeem Now >

Mammoth 2.50-Inch Front Leveling Kit (20-27 Jeep Gladiator JT, Excluding Mojave)

Find parts that fit my vehicle Item JG15807
Shop Owners Save More! Sign up for our dealer program

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features & Specs

    • Front Leveling Kit - 2.50-Inch
    • Corrects Factory Rake for a Level Stance
    • Increases Front Ground Clearance
    • Fabricated Steel Spacers
    • Front Sway Bar Links Included
    • Straight Forward - Bolt-on Installation
    • 2020-2027 Jeep Gladiator JT Models, Excluding Mojave

    Description

    Eliminates Factory Rake. A Mammoth Leveling Kit will raise the front of your 2020-2027 Jeep Gladiator JT by 2.5 inches to eliminate the original factory rake. This Mammoth Kit will not only level your Gladiator, but it will also provide additional tire clearance as well.

    Rugged Construction. The Spacers and Brackets included in this kit are fabricated from steel for superior strength and extra rigidity, while the Bump Stop Spacers are made from a polymer material. The steel parts are then completed in a high-grade, black powder coated finish for good looks and long-lasting corrosion resistance.

    Straight Forward - Bolt-on Installation. Mammoth designed its Front Leveling Kit to be a straight forward, bolt-on install with no cutting or drilling required. With all the necessary hardware included, this Leveling Kit can be installed in about 2 hours time.

    Application. This Mammoth 2.50-Inch Front Leveling Kit is designed to fit 2020-2027 Jeep Gladiator JT models, excluding Mojave.

    Mammoth JG15807

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Install Details & What's in the Box

    Installation Info

    What's in the Box

    • (2) Front Coil Spring Spacers
    • (2) Bump Stop Extensions
    • (2) Front Sway Bar Links
    • (2) Front Shock Extensions
    • (2) Bolt Sleeves
    • (4) M12 x 1.75 x 65mm Bolts
    • (4) M12 Flat Washers
    • (4) M12 Lock Nuts
    • (2) 5/16-24 x 3" Bolts
    • (2) 5/16-24 Lock Nuts
    • (2) 5/16-18 x 1" Bolts
    • (2) 5/16-18 Lock Nuts
    • (4) 5/16 Flat Washers

    Warranty

    Mammoth offers our valued customers the following Limited Warranty on all Mammoth product purchased after September 1st, 2026. What is Covered Subject to the terms, exclusions and limitations herein, and with respect only to products first sold in the United States, Mammoth warrants that its products shall be free of manufacturing defects for the lifetime of the product and finish defects, including rust & corrosion, for three (3) years from the date of initial retail purchase when the Mammoth product is installed and used on purchaser's vehicle according to supplied product installation instructions and/or warnings. This Limited Warranty is made only with respect to the initial purchaser and is not transferrable. Mammoth reserves the right to require proof of purchase as a condition of this Limited Warranty and to make future revisions to this product or its Limited Warranty without obligation to provide notice of same to purchaser or to conform existing product to future revisions. Any change to this warranty made after purchase may be applied retroactively at the sole discretion of Mammoth.

    Click Here for Full Warranty Info

    4.9

    Customer Reviews (43)

    Questions & Answers

    No questions about this product yet. Ask the First Question

    Will It Fit My Gladiator

    • 3.0L V6 EcoDiesel - 20, 21, 22, 23, 24
    • 3.6L V6 - 20, 21, 22, 23, 24, 25, 26, 27