How to Install Hyline Offroad 50 in LED light Bar Mount on your Wrangler

Light Bar Mount Installation

Step 1 – Using Torx Socket remove the 6 bolts in each windshield pillar. You will reuse the original hardware so don’t throw them away.

Step 2 – Install both brackets with one rubber liner behind each to protect the vehicle’s painted surface and reinstall original hardware. DO NOT TIGHTEN.

Step 3 – Now install you 50” Light Bar between both brackets. With mounting bracket hardware still loose you can run the light wiring behind the brackets. This is only one option for running wires. It is your decision to run wiring in any other way.

Step 4 – After wiring is run you can tighten the torx bolts and light bar hardware appropriately.