Talk to a Tundra Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Form Lighting LED Reflector Headlights; Black Housing; Clear Lens (14-21 Tundra)

Item TU20442
Verify parts fit and get product recommendations.
Tundra Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Our Price

$699.00 (pair)

FREE Shipping Market Price $796.99 You Save 12% ($97.99) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works
Install Shops are available near Ashburn - 20149

Add Local Shop Installation

Total cost of service $174.99
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      Noah: Noah here with ExtremeTerrain and we're going to take a closer look at the Form Lighting LED Reflector Headlights with Black Housings and Clear Lenses for the '14 to '21 Tundra. Now these headlights are perfect for the Tundra owner that wants a high quality set of upgraded LED lights that have a really bright daytime running light while still being budget friendly. Factory headlights usually leave a lot to be desired, and a dark colored set of LED lights is a great way to give your truck a facelift. Now sometimes upgraded lights still utilize those factory halogen bulbs, but these guys from Form Lighting are full LED from the bulbs to the daytime running lights. Now those chrome reflectors here at the back of the housing, they're gonna throw that LED light far down the road, and then behind those reflectors, there is a black housing. A black housing paired with a clear lens like we have here is a great way to get a dark aftermarket look without limiting the headlight's output with something like tinted lenses. Now LEDs are really bright, and keeping them unrestricted is the best way to get some serious lighting performance. Then the daytime running light is in a C-bar shape here around the outside edge of the lens, and they're colored a cooler color temperature. These lights also have a sequential turn signal function as well, but depending on your trim level or the kind of headlight you have stock, the sequential function may take some additional wiring to install. As far as construction goes, we've got ABS housings for some serious defense against any kind of moisture, heat, or any kind of debris. And then sealing everything shut, the lenses are made from polycarbonate, which has excellent impact resistance. Now these guys are a drop-in upgrade and they're designed to utilize the factory wiring in fused locations in the fuse box to control the daytime running lights. Pricing for these guys comes in around the $750 price point, which means they're still far under a lot of other LED options, but they still have quality build materials and a modern LED design. I'd say these headlights are a great middle ground between super affordable, no bells and whistles and high dollar complex design LED headlights with something like sequential turn signals. Now, if you want something quality and LED, but you're on a budget, these are going to be a great option for you. Installing this set of headlights on your Tundra is going to take you about an hour to do at home, and you're looking at an install difficulty of one out of three wrenches. Now this job should come pretty simple to just about anybody. Speaking of install, let's head over to the install bay and check out that process step by step.Man: For this install you will need a ratchet, a 10-millimeter socket, a clip removal tool, and if you are installing the adapter harness for the halogen headlights, you will need either the provided fuse puller in your fuse block or if you don't have that a pair of needle nose pliers will do. What's up, guys. Today we're going to be installing a new set of headlights on our Tundra so let's get started. So now that we've got our hood popped, we're going to come under here and we do need to remove our grille to access our headlights, so we'll go ahead and grab our clip removal tool and you'll have one push pin clip on each side located right by your headlight on your grille. So we can go ahead and start by popping those out. Get this one, then we'll do the same for the other one. Next we can go ahead and remove these four 10-millimeter bolts holding the top of our grille in place. And to do that we'll use our 10-millimeter socket on our ratchet. Next we can go ahead and grab the top upper middle portion of our grille and just kind of pull up on it slightly and it should pop right out of its retaining clips. Then we'll go ahead and pull, releasing our bottom clips here. So once you have your grille out of place, there is a connector on the back side of your grille that we'll need to unplug in order to fully remove it. For demonstration purposes, we've got it flipped up so we can show it to you here. And it doesn't put any tension on the cable to do it this way. So if you find it easier, it's definitely a way to go. We'll just push in on our tab here, then we can set our grille aside. So our next step is to remove this lower trim panel. And to do that, we have these two push pins here, which we'll go ahead and remove first with our clip removal tool. Once you have those two tabs out, you can go ahead and grab onto it, pull it out like this, and pop it out from its locator tabs here on the outside, and we'll set this aside. Next, we can remove our first of three 10-millimeter mounting bolts for our headlight itself, and to do that, we'll use our 10-millimeter socket on our ratchet. Sometimes they're a little hard to get out of their slots. And then we can remove the two up top. We'll go ahead and remove these two 10-millimeter mounting screws again with our 10-millimeter socket. Once we have those out, we can go ahead and pop our headlight out of the truck. You may need to pull up on this tab just a little bit. Get it over its threaded piece. Once you have that out, you also have this lower locator tab that you'll need to just pop out. Once you have that out, headlight comes right out. Then we can go ahead and unplug all of our connectors. So we'll just push in on our tabs here. Sometimes these can get a little stiff. Go ahead and just pop those out. And once you have them all removed, go ahead and set our factory headlight aside. And once you've completed all the steps on this headlight, you can go ahead and repeat this process for your other side.So your headlight kit does come with an LED conversion kit if your truck does come with factory halogen headlights. It comes with an adapter harness as well as a tapped DRL harness to access your LED DRLs. For demonstration purposes, we will show you how to install your harness on your fuse block and then you can simply go ahead and plug and play your adapter harness. Our truck has factory LEDs so we will not need them, but we'll show you how to install it. So once we have our fuse out, we can go ahead and install our provided pre-installed fuse tap with our two 15-amp fuses into the place of our factory 10-amp ignition fuse. We'll go ahead and set that in place and then we can route our harness along the truck. So now our shorter end of our harness for our first connector is obviously going to stay here for our closest headlight. And for our passenger side, we can route our harness over to the other side. Now for demonstration purposes, we're simply going to run our wiring here flush along with our foam padding in front of our radiator here. Now you can feel free to make this your own, tuck it however you'd like it. We're just doing this for ease of install but keep in mind to stay away from any rotating or very hot parts to prevent any damage to your harness or anything else in your engine bay. Now that we have that done we can go ahead and reinstall our fuse block cover. We'll just clip it in. Make sure it's secure.So now we're ready to get everything plugged in and installed. And so we'll go ahead and start making our connections. And our black triangle connector here goes right into our headlight. Then we'll move on to our DRL connector up here. Go ahead and plug that in up top. Make sure it clicks. And we'll go ahead, make our next connection here with our three prong. Now this plug here is not needed because ours has factory LEDs. If your truck has factory halogens, that will be a part of your conversion harness that is included. We'll go ahead and make our last connection here. Now that we have everything connected, we can go ahead and get our headlight back into place. We'll go ahead and get our light in place. Slide into our locators here. Make sure that pops into place. Get everything lined up, then we can start reinstalling our hardware. So first, we'll start with our side mounting bolt here, and we'll go ahead and reinstall our 10-millimeter bolt using our 10-millimeter socket on our ratchet. And you may have to push in a little bit on it to get it to line up. Now that we have that done, we can get our two top ones installed. We'll go ahead and get these on. Next, we'll get our outer trim piece installed here. Go ahead and line that up with the fender, clip that back into place here. Get it lined up here for our two push pins. Go ahead and get our pins installed. Pop those right in. So once you have everything connected and everything mounted back in place for your new headlight, you can go ahead and repeat this process for the other side. Now we can go ahead and get our grille reattached. You want to line up your spots here. And before you install your grille, you definitely want to make sure you plug your connector back in. And once you get that clipped in, we'll go ahead and set our grille into its lower mounting points. Then you wanna make sure all of your set points line up at the bottom. Just give the bottom a good push. And again, we can lift up a little bit so we can line the top up. Now we can go ahead and reinstall our four 10-millimeter screws up top here, holding the top of our grille in place using our 10-millimeter socket on our ratchet. Now that we have those installed, we can go ahead and reinstall our two push pins here. Go ahead and just push those back into place, pop them in.All righty, guys, that about wraps up our review and install of our Form Lighting LED Reflector Headlights with Black Housings and Clear Lenses for your '14 to '21 Tundra. Thanks for watching and as always for everything Tundra, keep it right here at extremeterrain.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • LED Headlight Pair
      • Fierce Bold Design
      • Deep Black Housing
      • Clear Durable Lenses
      • Checks SAE, DOT, FMVSS, and CMVSS Requirements
      • Limited 2-Year Warranty
      • Easy Installation
      • Fits 2014-2021 Tundra Models

      Description

      Reflector Style Lights. Run with a clearer view of your roads and a sharper look to your Tundra with this Form Lighting LED Reflector Headlights; Black Housing; Clear Lens. Sporting a bright DRL that outlines the sleek shape of the housing, it adds a fierce aesthetic to your car's face as well as additional illumination to alert other drivers of your presence during poor or dark road conditions.

      No Required Splicing. Using only simple hand tools, this Headlight Upgrade can be yours in moments. Thanks to its bright engineering, you won't need to complicate the wiring setup and get crisp lighting without having to cut your wires. It also comes with fuse taps for DRL control and protection against flickering.

      Warranty. There is a limited 2-year warranty on this product.

      Installation. This product is easy to install and should take about 1 hour.

      Application. The Form Lighting LED Reflector Headlights; Black Housing; Clear Lens fits 2014-2021 Tundra Models.

      Fitment:

      Form Lighting FL0002

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (2) Headlight Assembly
      • (1) Fuse Tap and Harness Set
      • Mounting Hardware
      5.0

      Customer Reviews (1)

        Brand Image

        Reviews of Form Lighting Lights products have an average rating of 4.5 out of 5

          Questions & Answers

          10 More Questions