Factor 55 Hitchlink 3.0; Gray (Universal; Some Adaptation May Be Required)

Why reduce a 3″ receiver with sleeves when you don’t have to! For Class V 3″ hitch receivers ONLY. Our truck owners asked and we listened. NO NEED TO SLEEVE Class V hitch receivers to weaker Class III and Class IV. Finally a hitch receiver shackle mount designed for Class V 3″ receivers. Only available in Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish. The HitchLink 3.0 will accept both ¾ and 7/8 shackles and features a machined radius on the shackle mount hole for soft shackle compatibility. It can be oriented inside the hitch receiver allowing the shackle tab to be parallel to the bumper or vertical depending on its desired need. It also eliminates the need to use a receiver sleeve to downsize your receiver to a 2.5 or a 2” adapter.

Rated at 18,000 lbs.
Ultimate Failure at 70,000+ lbs.
MADE IN THE USA
Check out the Factor 55 Truck/SUV Catalog
Warning - Please be sure to confirm you have a Class V 3" receiver before ordering to avoid improper fit or returns.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov