C4 Fabrication Hybrid Front Bumper with 30-Inch Light Bar Cutout and Mid-Height Bull Bar; Standard Width; Black (14-21 Tundra w/ Parking Sensors)Find parts that fit my vehicle

Hybrid Strength and Lighting Integration. The C4 Fabrication Hybrid Front Bumper with 30-Inch Light Bar Cutout and Mid-Height Bull Bar combines off-road functionality with sleek design, tailored for Toyota Tundra owners seeking protection and lighting capability. Designed with a standard-width profile, this bumper improves front-end clearance for better approach angles while accommodating a 30-inch light bar. It's also fully compatible with factory parking sensors, maintaining OEM features.

Construction and Appearance. Constructed from 3/16-inch laser-cut P&O steel, the center section ensures a strong and durable foundation. Reinforced with 3/8-inch thick mounting plates and a 1/4-inch winch mounting plate, it's built to handle the toughest recovery demands. The bumper features 3/4-inch thick D-ring tabs fully welded front and back, and the mid-height bull bar is formed from .120 wall, 1 3/4-inch diameter HREW tubing. It weighs 150 pounds without the bull bar and up to 165 pounds with the full-height version. It ships raw unless a powder-coat finish is selected.

Installation. Installation is moderately difficult and may require multiple hands or a professional install. Some trimming and alignment may be needed depending on the truck's setup.

Application. This C4 Fabrication Hybrid Front Bumper with 30-Inch Light Bar Cutout and Mid-Height Bull Bar fits 2014 to 2021 Toyota Tundra models equipped with parking sensors.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov