Talk to a Tundra Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12K Summer Sweepstakes! Enter Now >

Find Cold Air Intakes for your Tundra

AEM Induction Brute Force Cold Air Intake; Polished (07-21 5.7L Tundra)Find parts that fit my vehicle

Item TU1301
Product Image
ExtremeTerrain no longer carries the AEM Induction Brute Force Cold Air Intake; Polished (07-21 5.7L Tundra). Please check out 2007-2013 Toyota Tundra Intake Systems for an updated selection.
$0.00
27 Reviews

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Boosts Torque and Horsepower
    • Gives More Miles Per Gallon
    • Improves and Increases Airflow to the Engine
    • Washable Dryflow Filter With Non-Woven Synthetic Material
    • Powder-Coated Heat Shield for Cooler Intake Air
    • Mandrel-Bent, 6061 Aluminum Inlet Tube
    • Polished Chrome-Like Finish
    • Simple, Hassle-Free Installation
    • Doesn’t Require a Custom Tune
    • Not CARB-Certified
    • Backed by a Limited Lifetime Warranty
    • Fits 2007-2021 Models of the Toyota Tundra With 5.7L Engines

    Description

    Increases Power and Enhances Performance. Upgrade your Toyota Tundra from stock to this polished AEM Brute Force Cold Air Intake and experience a huge boost in performance. The mandrel-bent aluminum inlet tube lets more air into the engine, increasing your truck’s torque and horsepower output. What’s more, this cold air intake can also help boost your engine’s overall efficiency. This results, among others, in better fuel economy.

    No Custom Tune Needed. AEM made sure that this cold air intake will work with your vehicle’s factory tune. Still, it’s ideal to get a custom tune to reprogram the ECU to get the best possible performance. A custom tune is also recommended if you have multiple upgrades installed.

    AEM Dryflow Non-Woven Synthetic Filter. This cold air intake comes with AEM’s cylinder-shaped Dryflow filter, which is made from an oil-free, non-woven synthetic material. The filter media can last for up to 100,000 miles (depending on driving frequency and environments), after which you can simply wash and reuse it. This helps drive down maintenance and replacement costs.

    Mandrel-Bent 6061 Aluminum Inlet Tube. To ensure a smooth, unobstructed airflow, this cold air intake features a mandrel-bent, 6061 aluminum inlet pipe. The choice of material ensures top-notch strength and durability, which is further enhanced by a lustrous, polished-surface finish. To keep the intake air cool, this system also comes with a powder-coated heat shield. The shield sits right after the inlet tube to protect the filter.

    Quick and Easy Installation. AEM engineered this cold air intake system for a direct bolt-on installation, without any welding, drilling, or cutting required. This kit also comes with all the necessary hardware, including TIG-welded brackets. The total installation time is approximately 45 minutes to 1 hour.

    Comes With a Limited Lifetime Warranty. This cold air intake system is covered by AEM’s limited lifetime warranty against material and workmanship defects. If you need more details or have any questions about the warranty terms and conditions, please contact the manufacturer.

    Doesn’t Have a CARB Certificate. This particular AEM cold air intake doesn’t have a CARB certification. It can’t be sold or used legally in California and all states that adopt California’s emission procedures.

    Application. This polished AEM Brute Force Cold Air Intake can be installed on 2007-2021 editions of the Toyota Tundra with 5.7L engines.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    Installation Time

    (approx) 1 Hour

    Difficulty Level:

    Simple installation for anyone.

    Installation Guides

      No guide available for this part yet.

    What's in the Box

    • (1) Filter Assembly
    • (1) Inlet Pipe
    • (1) Heat Shield
    • (1) Hose With Adapter
    • (1) Edge Trim
    • (1) 21-Inch Hose (5/8-Inch Internal Diameter)
    • (1) 19-Inch Rubber Edge Trim
    • (1) Six-Inch Rubber Edge Trim
    • (2) Rubber Mounts
    • Mounting Hardware
    • Installation Instructions
    4.7

    Customer Reviews (27)

    Questions & Answers

    No questions about this product yet. Ask the First Question