Zombie Racks Wasteland Full Roof Rack; Raw (20-25 Jeep Gladiator JT)Find parts that fit my vehicle

This Is A Complete Full Wasteland Rack Assembly For The 2020+ Jeep JT Gladiator Models With Factory Hardtops, Installed With Bolt On Drip Rail Mounts Which Require NO DRILLING. This Rack System Extends The Full Roof Length With The Mounts Attaching To Multiple Points Along The Drip Rails. With Ten Heavy Duty Drip Rail Mounts, This Rack Offers Superior Strength & Weight Carrying Capacity*. This System Is Configured As A Wasteland System With No Additional Rails. Hybrid Death Rails Or Double Tap Rails Can Be Added At Any Time If You So Choose.

Each Full Rack Assembly Contains The Following:
(2) Flat Front Ends (Driver & Passenger Sides)
(6) Intermediate Assemblies
(2) Short Ends (Driver & Passenger Sides)
(12) 54" Crossbars
(10) Heavy Duty Bolt On Drip Rail Mounts
Optional Selections

FINISH
TEXTURED BLACK - A Durable Fine Textured Black Powdercoat Finish
RAW - Raw Aluminum Finish With No Surface Prep*

SPECS
LENGTH - Overall 63" (5ft 3in Or 160.02cm)
WIDTH - 54" Overall
HEIGHT- (Height Increase Over Hardtop Humps) +3"
CARGO AREA - 23.63 sq. ft. Cargo Area
WEIGHT - 45lbs
CAPACITY* - Factory HardTop Rated Capacity Of 250lbs Static, 120lbs Dynamic - Overload At Your Own Risk. ALWAYS Distribute Loads As Evenly As Possible, Secure With Correct Equipment And Check Load Periodically During Travels.

*Corrosion Resistance Is Only Achieved Through A Post Applied Finish On The Raw Aluminum Components (I.E - Powdercoat Or Anodizing). Raw Finish Will Not Provide ANY Corrosion Resistance And MUST Be Coated Before Installation.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov