Zombie Racks Wasteland Full Roof Rack with Double Tap Rails; Raw (20-25 Jeep Gladiator JT)Find parts that fit my vehicle

This Is A Complete Full Rack Assembly With Double Tap Rails For The 2020+ Jeep JT Gladiator Models With Factory Hardtops, Installed With Bolt On Drip Rail Mounts Which Require NO DRILLING. This Rack System Extends The Full Roof Length With The Mounts Attaching To Multiple Points Along The Drip Rails. With Ten Heavy Duty Drip Rail Mounts, This Rack Offers Superior Strength & Weight Carrying Capacity*. This System Is Configured As A Double Tap Rail System With Traditional Basket Style Rails. Hybrid Death Rails Can Be Added Or DTR Rails Can Be Removed At Any Time If You So Choose.

Each Full Rack Assembly Contains The Following:
(2) DTR Flat Front Ends (Driver & Passenger Sides)
(6) DTR Intermediate Assemblies
(2) DTR Short Ends (Driver & Passenger Sides)
(14) 54" Crossbars
(10) Heavy Duty Bolt On Drip Rail Mounts
(20) DTR Side Supports & Hardware
Airdam Assembly + Mounting Hardware
Optional Selections

FINISH
TEXTURED BLACK - A Durable Fine Textured Black Powdercoat Finish
RAW - Raw Aluminum Finish With No Surface Prep*

SPECS
LENGTH - Overall 63" (5ft 3in Or 160.02cm)
WIDTH - 54" Overall, 53" Inside Rails
HEIGHT- (Height Increase Over Hardtop Humps) +5"
CARGO AREA - 22.08 sq. ft. Cargo Area
WEIGHT - 57lbs
CAPACITY* - Factory HardTop Rated Capacity Of 250lbs Static, 120lbs Dynamic - Overload At Your Own Risk. ALWAYS Distribute Loads As Evenly As Possible, Secure With Correct Equipment And Check Load Periodically During Travels.

*Corrosion Resistance Is Only Achieved Through A Post Applied Finish On The Raw Aluminum Components (I.E - Powdercoat Or Anodizing). Raw Finish Will Not Provide ANY Corrosion Resistance And MUST Be Coated Before Installation.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov