Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to Tundra Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Tundra! Enter daily!

SkyJacker 2-3 in. Coilover Suspension Lift Kit w/ Hydro Shocks (07-20 Tundra)

Item TU1213
Call a Tundra Enthusiast at 1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $1,458.90 You Save 13% ($190.29)
Our Price

$1,268.61 (kit)

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • Front and Rear Suspension Lift Kit
    • Lifts the Front by Up to 3 Inches and the Rear by 1.25 Inches
    • Enhances Street and Off-Roading Ride Quality
    • Hydro H7000™ Series Rear Shocks
    • Front Coil-Over Shocks
    • Flat Rear Lift Blocks
    • Can Fit Up to 35-Inch Tires
    • Direct-Fit Installation
    • Comes With a Limited Lifetime Warranty
    • Compatible With 2007-2020 Toyota Tundra Models

    Better Off-Roading Capabilities. Make your Tundra a more capable vehicle with this SkyJacker 2-3-Inch Coilover Suspension Lift Kit with Hydro Shocks. It lifts the front and rear by 3 and 1.25 inches, respectively, allowing you to install up to 35 inches for an imposing look. Larger tires also help you conquer more challenging off-road trails. Lastly, the extra ground clearance makes for a more comfortable ride experience, both on and off the road.

    Hydro™ Series Rear Shocks. This suspension lift kit includes a pair of rear Hydro H7000™ series shocks. They combine hydraulic action with multi-stage, velocity-sensitive valving to give you excellent and consistent damping in almost any condition. Moreover, these shocks are extremely durable. They feature bonded-iron pistons and chromed piston rods for increased toughness and an extended lifespan.

    Front Coil-Over Shocks. SkyJacker went the route of coil-over shocks for this lift kit. This way, your truck will be able to provide more effective shock damping. You can also adjust the front lift height without affecting the damping quality. Using coil-over shocks also boosts your truck’s load-bearing capacity. Last but not least, these front coil-overs are guaranteed to provide a smooth and comfortable ride.

    Flat Rear Lift Blocks. For the rear lift height, SkyJacker included a pair of flat rear lift blocks in this suspension kit. They provide 1.25 inches of added height, which will retain the factory driveshaft angle to maintain comfortable handling. The blocks are fastened by a set of durable U-bolts for added structural support.

    Simple Bolt-On Installation. This suspension lift kit is easy enough to install, without any cutting, drilling, or welding required. Total installation time is approximately 3-4 hours using the enclosed mounting hardware and following the instruction manual.

    Protected by a Limited Lifetime Warranty. This SkyJacker suspension lift kit is covered by a limited lifetime warranty. This covers material and workmanship defects and applies only to the original buyer and the original vehicle. For more details and any questions about the warranty terms and conditions, you may contact the customer service team.

    Application. This SkyJacker 2-3-Inch Coilover Suspension Lift Kit With Hydro Shocks can be installed on 2007-2020 Toyota Tundras.

    Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Details

    MPN# TU730K-H

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (2) Front Coil-Over Shocks
    • (2) Front Coil Springs
    • (2) Upper Coilover Mounts
    • (2) Rear Shocks
    • (2) 1.25-Inch Rear Flat Blocks
    • (4) U-Bolts (9/16 x 2-1/2 x 8-3/4)
    • (8) 7/16 X 1 Fine Thread Bolts
    • (16) 7/16 SAE Washers
    • (8) 7/16-20 Fine N/I Thread Lock Nuts
    • (2) 1/2 X 2 1/2 Fine Thread Bolts
    • (4) 1/2 SAE Washers
    • (2) 1/2-20 Fine Thread N/I Lock Nuts
    • (2) 5/8 X 7 1/2 Fine Thread Bolts
    • (4) 5/8 SAE Washers
    • (2) 5/8-18 Nylon Insert Lock Nuts
    • (8) 9/16 Fine Thread Lock Nuts
    • Mounting Hardware
    • Instruction Manual
    Installation Info

      Customer Photos

        Q & A

        No questions about this product yet.

        Ask the First Question

          Reviews