RPM Steering 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit with Rubicon Ultimate Aluminum Sway Bar Links and FOX 2.0 IFP Performance Shocks (20-23 3.0L EcoDiesel Jeep Gladiator JT w/ Stock Axles)

Maximum Articulation and Control. The 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit features FOX 2.0 IFP (Internal Floating Piston) performance shocks, delivering proven damping control and ride stability on a wide range of terrain. Whether navigating tight switchbacks, tackling uneven backroads, or cruising at highway speeds, these shocks are engineered to offer a balanced blend of comfort and control.

Strength in Motion. Precision-crafted from premium 7075 T6 aluminum sourced in the USA, the control arms included in the 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit redefine durability. Lighter than steel yet incredibly strong, these components are CNC-machined to provide precise suspension geometry.

Freedom to Flex. Every control arm in the 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit comes pre-equipped with Rock Jock narrow Johnny joints at both ends, a proven solution for enhanced movement and vibration reduction.

Heavy-Duty Precision. At the heart of the 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit is a set of heavy-duty DOM (Drawn Over Mandrel) track bars, built with thick-wall 1-3/8" tubing for robust structural integrity. These track bars are designed to keep the axle aligned under load, aided by Rock Jock joints at both ends that allow controlled movement without compromising strength.

Ride Quality That Adapts. Adaptability is built into the triple-rate coil springs that come with the 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit. These springs deliver progressive resistance that adjusts based on the amount of compression.

Clean Geometry After the Lift. To maintain factory-aligned geometry after installation, the 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit comes with a rear bolt-on track bar relocation bracket. This sturdy steel bracket repositions the rear track bar for optimal alignment, reducing lateral axle movement while maintaining a straightforward installation process.

Installation. Putting this 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit with Rubicon Ultimate Aluminum Sway Bar Links and FOX 2.0 IFP Performance Shocks on your 3.0L EcoDiesel Jeep Gladiator JT takes 6 hours to install.

Warranty. There is a lifetime warranty on this product.

Application. The 3-Inch Ultimate Aluminum Long Arm Suspension Lift Kit with Rubicon Ultimate Aluminum Sway Bar Links and FOX 2.0 IFP Performance Shocks fits 2020-2023 3.0L EcoDiesel Jeep Gladiator JT models with Stock Axles.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov