Mammoth 3.50-Inch Suspension Lift Kit with FOX Shocks (20-26 Jeep Gladiator JT, Excluding Mojave)

Go Off-Road. Going off-road can be tough for your Gladiator JT’s stock suspension, that's why you need a lift kit that was specifically designed to take on the great outdoors. Luckily, this Mammoth 3.5-Inch Suspension Lift Kit has what you need to help you take on the obstacles found on and off-road. With 3.5 inches of lift, this kit can accommodate tires up to 35-inches in size. This Mammoth Kit features linear coil springs, bump stop extensions, front rear sway bar end links, adjustable track bar and track bar tie rod end. What’s more, the included FOX Performance Series 2.0 IFP Shock Absorbers will provide a highly comfortable ride, even when tested across rough terrain.

FOX Performance Series 2.0 IFP Monotube Shocks. Featuring a 5/8-inch hard chrome plated heat-treated alloy steel shaft, this FOX Shock has a 2-inch diameter CNC machined 6061-T6 shock body that allows for increased cooling capacity. The Internal Floating Piston (IFP) mono-tube design separates the JM92 shock oil from the high-pressure, nitrogen-charged gas chamber to eliminate oil aeration allowing for maximum performance. The Shock is completed in durable, clear-anodized finish for impressive good looks and long lasting durability.

Coil Springs. The front and rear coil springs included in this Mammoth 3.5-inch Suspension Lift Kit have been engineered to work perfectly in conjunction with the other components of the kit. These springs will not only aid in lifting your Gladiator for increased clearance, but they will also help to provide a smooth comfortable ride.

Adjustable Front Track Bar. Designed to work in conjunction the new lifted ride height, the included Front Track Bar is fully adjustable and allows for fine tuning, giving you superior performance both on and off-road. Manufactured from steel for superior strength, this Track Bar is completed in a durable black powder coat finish for excellent durability and long lasting corrosion resistance.

Sway Bar End Links. The included front and rear Sway Bar End Links were designed to work with the new lifted ride height of this Kit. Manufactured from steel these, Sway Bar End Links feature high-density polyurethane bushings which are much more durable than the original stock rubber units to provide years of trouble free driving.

Installation. This Lift Kit was engineered to be installed with no welding or cutting needed, making it a bolt-on kit. However, professional installation is recommended. With all the necessary hardware included, this Lift kit can be installed in about 6 hours time. Please note that an alignment is highly recommended after installation.

Application. This Mammoth 3.50-Inch Suspension Lift Kit with FOX Shocks is designed to fit 2020-2026 Jeep Gladiator JT models, excluding Mojave.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov