Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Elka Suspension 2.5 Reservoir Front Coil-Overs for 2 to 3-Inch Lift (07-21 Tundra)Find parts that fit my vehicle

Item TU21841
ExtremeTerrain no longer carries the Elka Suspension 2.5 Reservoir Front Coil-Overs for 2 to 3-Inch Lift (07-21 Tundra). Please check out 2000-2006 Toyota Tundra Suspension for an updated selection.
Shop Owners Save More! Sign up for our dealer program

    Product Information

    Description, Q&A

    Description

    Description. Increase the off-road capabilities while improving the comfort and handling of your TUNDRA

    The 2.5 RESERVOIR shocks provide the optimal combination of:

    Firm and stable handling for driving on desert and fire roads (sports car feeling);

    Plush compliance while off-road driving over washboard;

    Strong ramping effect for extra bottom-out protection over large dips and washes;

    Maximum articulation and traction for rock climbing.

    BENEFITS

    High-performance off-road capabilities

    Improved handling and comfort for casual driving

    Better traction

    Provides leveling capabilities for better weight distribution

    Increased protection against bottoming-out

    RIDE ENHANCEMENTS

    Spring setup optimized for each setup

    Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)

    Damping characteristics optimized for each truck and setup, providing a smoother ride

    Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts

    More stable and more predictable handling

    Reduced front-end diving when cornering or braking

    Reduced rear-end bucking and lifting

    Increased damping and spring rate for better handling when towing or loading truck

    TECHNICAL FEATURES

    Massive 2.5 in. (56mm) hard-anodized aluminum body for cooler operation

    Big bore design with less restricted oil flow for increased responsiveness and less fading

    Internal hydraulic valving optimized for each vehicle platform

    Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components

    External remote reservoir with low-friction floating piston (1:1 ratio vs. main piston) providing additional cooling

    DOT high-flow reservoir hose

    Heavy-duty 3/4 in. (19mm) induction-hardened shaft

    Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring

    Direct, bolt-on replacement that uses stock shocks location

    Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature

    Coilover models use Elka’s durable high-tensile alloy springs or Eibach springs (depending on model & configuration)

    Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available

    The 2.5 RESERVOIR model features an external reservoir with increased oil volume for cooler operating temperature, providing better performance and consistency. These shocks are a good performance upgrade over OEM shocks.

    This configuration is for use exclusively with aftermarket lift kits or upper control arms to accommodate between 2 in. to 3 in. of lift.

    Ride height is preset from our factory at approximately 2.5 in. of lift at the front for most setups, actual ride height may vary depending on wheels dimensions and lift kit or upper control arms used.

    Package includes two (2) side-specific front shocks:

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    4.7

    Reviews of Elka Suspension Suspension Products (3)

    Questions & Answers

    No questions about this product yet. Ask the First Question