Talk to a Gladiator Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Next Venture Motorsports Adventure Series Front Bumper with Skid Plate and 7-Inch Stinger; Bare Aluminum (20-24 Jeep Gladiator JT)

Item JG18010
ExtremeTerrain no longer carries the Next Venture Motorsports Adventure Series Front Bumper with Skid Plate and 7-Inch Stinger; Bare Aluminum (20-24 Jeep Gladiator JT). Please check out 2020-2024 Jeep Gladiator Front Bumpers for an updated selection.
Verify parts fit and get product recommendations.
Gladiator Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Description, Reviews, Q&A

    Description

    Description. Looking for an Adventure Series styling in a lightweight but stout package? Next Venture Motorsports have modified their Adventure Series bumpers, by changing out nearly every component for a slightly thicker, however lighter weight aluminum component. This particular bumper, is designed for one of the fastest pulling, heavy duty winches available that will bolt onto your JL/JT Chassis: The Warn 8274. This is about the fastest winch you can fit onto the front of your Jeep and is definitely a favorite among the recovery experts we have talked with.

    PRODUCT DETAILS. Crafted from a combination of 1/4" and 3/16" Aluminum, along with 1" thick steel recovery points welded to a 1/4" thick steel inner winch tray, this rear bumper is both lightweight and stout-where-it-counts so that you can hit the hardcore trails with confidence!

    This bumper can be run by itself, as an ultra-high clearance bumper, or configured with the lower front skid as shown. The lower front skid fully protects the Rubicon sway bar disconnect motor -- many on the market only appear to but leave the very bottom or back of the disconnect components exposed.

    The tube work shown is a bolt on stinger, available in a 7" height and 11" height as measured from the top of the bumper. The tube work is bolt on, and made from 2" 120 wall DOM Steel. The tube work ties into the bumper's inner steel winch tray when bolted in, offering greater strength and tieing all 3 components (stinger, shell and winch tray) together once fastened into place.

    LIGHTING OPTIONS. By default, this bumper comes equipped to reuse your factory/OEM foglights inside the winch tray.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    4.5

    Customer Reviews (2)

      Brand Image

      Reviews of Next Venture Motorsports Exterior products have an average rating of 4.5 out of 5

        Questions & Answers

        10 More Questions