Logo Image
$3,000 Sweepstakes! Enter Daily >

Clayton Off Road Adjustable Front Trackbar with Bracket for 3 to 6-Inch Lift (93-98 Jeep Grand Cherokee ZJ)Find parts that fit my vehicle

Item JGC43886
Product Image
ExtremeTerrain no longer carries the Clayton Off Road Adjustable Front Trackbar with Bracket for 3 to 6-Inch Lift (93-98 Jeep Grand Cherokee ZJ). Please check out 1993-1998 Jeep Grand Cherokee ZJ Suspension for an updated selection.
New
Shop Owners Save More! Sign up for our dealer program

    Product Information

    Description, Q&A

    Description

    Our XJ and ZJ adjustable track bar gives you all the strength and adjustability your lifted Jeep needs. A greaseable forged johnny joint is used at the frame end, and a dual durometer, maintenance free, high quality Giiro Joint bushing is pressed into a machined housing on the axle end.

    Many customers have complained that their stock, or previous track bar has loosened up and damaged or egged out the factory hole. This adjustable track bar for your XJ uses a much larger 9/16s Grade 8 bolt to allow you to drill out your factory location and easily upgrade to this HD bushing.

    Product Features:

    • 2.5 Inch Forged Johnny Joint Adjuster
    • 1 3/8 Inch X 5/16 Inch DOM Tubing
    • Dual Durometer Giiro Joint
    • Bushing 9/16 Inch Grade 8 Hardware W/ Flanged Tab
    • 1/4 Inch Lowered Height
    • Double Sheer Track Bar Bracket
    • XJ & ZJ 6-8 Inch of Lift
    • Lifetime Warranty*
    • Made In The USA!

    Put simply - this is the strongest, most adjustable track bar on the market. Our XJ Adjustable track bar comes powder coated black with a 9/16 hardware and a new lower flange tab to fit into the Oe location at the axle side.

    This newdrop bracket lowers the track bar height and puts our heavy duty track bar in double sheer. This means we recommend our drop pitman arm and should be used with 6-8 inches of lift. The bracket bolts into the OEM location, and we recommend adding a few small welds for added strength. The bracket is designed to accept a 2.5 inch forged johnny joint using a 9/16s grade 8 bolt. Inside bracket width is 2 5/8s.

    Track bar - Center to Center Min = 31-1/8 Inch, Max = 32-3/16 Inch

    Note: Drilling is Required to install this track bar.

    Features:

    • 2.5 Inch Forged Johhny Joint Adjuster
    • 1 3/8 Inch X 5/16 Inch DOM Tubing
    • Dual Durometer Giiro Joint
    • Bushing 9/16 Inch Grade 8 Hardware W/ Flanged Tab
    • 1/4 Inch Lowered Height
    • Double Sheer Trackbar Bracket
    • LIfetime Warranty*
    • Made In The USA!

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Questions & Answers

    No questions about this product yet. Ask the First Question

      Most Popular from Steer Smarts

            }