Full 360 Degree LED Chip Machine-Soldered Bulbs; Red; 7440/7443

Powerful LED Turn Signals. Take your turn signals to the next level in your Jeep using these Jeep LED Chip Machine-Soldered bulbs. These bulbs are made from dozens of tiny LED modules working together to generate a bright and even light source. The bulbs fit exactly like the originals into position and can be installed in 2020-2025 Jeep Gladiator models as well as many other types of vehicles as well.

SMD LED Bulbs. Each of these bulbs uses hundreds of tiny 3014 SMD LED chips. These little devices are rated to last up to 50,000 hours, and they output a high amount of light efficiently. They’re vibration-resistant, generate little heat, and are long-term LED units for a modern light bulb.

Rapid Installation. Most Jeep owners can install these replacement bulbs in just a few minutes. Begin the process by removing a few clips on the front of the wheel well liner to peel the liner back slightly. With the edge of the liner out of the way, you can access the turn signal housing and easily replace the bulb. Now pull the old bulb out along with the wiring, disconnect the original light bulb and replace it with the LED option.

1-Year Warranty. These lights are covered by a 1-year warranty for reliability. They are protected against manufacturer defects and quality-control issues to ensure the bulbs function as expected.

Application. These replacement LED bulbs fit Jeep Gladiator 2020-2025 models as well as many other types of Jeeps that use 7440 or 7443 bulb types.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov