Clayton Off Road HD Steering System (99-04 Jeep Grand Cherokee WJ)Find parts that fit my vehicle

Our Jeep Grand Cherokee WJ, 1999-2004 complete steering has both strength and simplicity in mind.

The strength comes from the 1 3/8s Solid 7075-T651 Aluminum bar which we drill and tap for Oe style end links. This is used for both the drag link, and the tie rod. An upgraded tie rod steering stabilizer mount is included which allows you to upgrade to a recommended Fox or Bilstein steering stabilizer.

Simplicity is achieved by making this a 100 percent bolt in system. Just unbolt your factory tie rod and drag link, assemble your new links, and bolt our heavy duty aluminum version in. No drilling, cutting or welding is required.

If you already upgraded your end links, check out our Jeep Grand Cherokee WJ Upgrade Steering system. This provides the aluminum tie rod, drag link, jam nuts, stabilizer mount and allows you to reuse your end links.

Product Features:

• Easy Direct Bolt In Setup
• Complete Bolt in Drag Link
• Complete Bolt In Tie Rod
• Steering Stabilizer Mount
• 7075-T651 Aluminum
• 1 3/8 Inch Solid Round Rod
• Oe WJ 24mm-1.5 Thread
• Left Hand/ Right Hand Threaded
• Made In The USA!

Note: Stock steering stabilizer does Not work with this system. Steering system can be used on both stock height and lifted Jeeps.

* Steering Tie Rod End at Pitman Arm (CRO-52088511) and Steering Tie Rod End at Right Knuckle (CRO-52088870AA) are Non Greasable!

Features:

• Easy Direct Bolt In Setup
• Complete Bolt in Drag Link
• Complete Bolt In Tie Rod
• Steering Stabilizer Mount
• 7075-T651 Aluminum
• 1 3/8 Inch Solid Round Rod
• Oe WJ 24mm-1.5 Thread
• Left Hand/ Right Hand Threaded
• Made In The USA!

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov