C4 Fabrication Rock Runner Front Bumper with Plate Sides; Raw (10-24 4Runner)Find parts that fit my vehicle

Requires cutting of the plastic bumper to install.Weights: Front w/ Plate Sides: 100 lbs, Front w/ Plate Sides and Bull Bar: 106, Front w/ Tube Sides: 102 Front w/ Tube Sides and Bull Bar: 108 lbs.Frame support brackets are INCLUDED with bumper.Modular, 3-piece design utilizing bolt-on wings.Bumpers ship with winch cover plate and bridge skid that will connect to our current skid plates and factory cross member.Fits most winches 8k-10k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (Smittybilt X20, Warn VR series are both common winches that fit).We recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.Cutouts in front of bumper allow winch lever access.Includes aluminum fill panel to complete the look of the bumper if you choose not to install a winch.Bumper is made from 11 ga laser cut P&O steel with 3/16" thick mounting plates and winch plate.3/4″ thick D-ring tabs fully welded front and back come standard.1.5" x .120" tube is used on tube sides as well as bull bar.Washer tank skid can be added for additional protection.Tube sides include light mounts in wings and are sized to allow fitment of up to 1 Squadron, 1 S2 and 1 S1 light one each side.TSS relocation bracket available for 2020+.Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov