Safe Jack 12-Ton Pinch Weld Bottle Jack Pad

Lift from the safest jacking point designated by your vehicle's manufacturer with the 12-ton Pinch Weld Pad Frame Pad from Safe Jack! Our Lift Pads are engineered to safeguard your vehicle against damage, offering a substantial increase in safety compared to the traditional jack saddle usage on non-reinforced structures. By distributing the load over a broader area, this pad provides enhanced stability and reduces the load forces on the lift point. The design minimizes the risk of slipping or tipping during lifting operations and installation is a breeze! Simply stack the Lift Pad atop our 12-ton Bottle Jack Extensions or directly on the Extension Screw when the 12-ton Extension Screw Collar has been installed.
Safe Jack utilizes the Extension Screw Collar to create a secure engagement for the Extensions and Lift Pads, as well as to maximize the available stroke to an additional 1.5 inches. These premade Extension Screw Collars are measured specifically for the bottle jack brands we carry. If you have your own bottle jack you wish to use instead, you may need to purchase a Custom Extension Screw Collar. If you opt out of purchasing a Custom Extension Screw Collar, the adapters may still work, but you will not achieve the additional 1.5 inches of stroke. The 12-ton adapters will fit over a bottle jack saddle diameter of 1.25 inches - 1.75 inches (31.75 mm - 44.45 mm.) If the hydraulic cylinder (ram) is smaller than this, we advise against using the adapters without an Extension Screw Collar, as the point of engagement will be unstable

Features
Fits over bottle jacks with 1.25 inches - 1.75 inches (31.75 mm - 44.45 mm) diameter saddle
Use on designated pinch weld jack points2 inches of internal engagement
Steel construction
Durable powder coat finish
Compatible with most bottle jacks
Numerous stacking combinations with other Safe Jack Extensions & Lift Pads
Made in the USA

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov