Eliminate Drive-By-Wire Pedal Delay the Bluetooth Way.
You can now eliminate that annoying throttle delay, which is well-known on Jeep Renegade models, with a Pedal Commander Bluetooth Throttle Response Controller. Jeep uses a drive-by-wire system that monitors the position of the gas pedal to control the throttle electronically, similar to a dimmer switch. The problem with this setup is that the signal from the pedal has to first be sent to the ECU, which in turn then sends the signal to the actuator motor that controls the throttle body itself. This delay is most noticeable when trying to speed up to merge with fast moving traffic or pass a slower moving car. However, you can now eliminate this annoying delay for crisp throttle response with a Pedal Commander Bluetooth Throttle Response Controller.Four Adjustable Control Modes.
Unlike other throttle control devices that are either on or off, the Pedal Commander comes with four preset control modes for Eco, City, Sport and Sport Plus driving applications. Best of all, each mode has 8 different levels of sensitivity that can be controlled manually or with your Blue Tooth enabled smart device. This will allow you to adjust each mode to your own personal driving style and needs. You can now use your smart device to change the settings instead of physically bending down and doing it manually on the Pedal Commander.Easy Plug and Play Installation.
The Pedal Commander Bluetooth Throttle Response Controller connects directly into the stock throttle position sensor. This sensor is found on the drive-by-wire gas pedal using an OEM style plug and play connector with no permanent modifications required. The Pedal Commander is 100% reversible, making it warranty friendly.Two-Year Product Warranty.
Pedal Commander manufactures their Bluetooth Throttle Response Controller to the highest quality and standards with CE and TUV Certification. However, in the event you do receive a defective or malfunctioning device, Pedal Commander will replace it free of charge within 2 years of the original purchase date.Compatible with Aftermarket Programmers.
The Pedal Commander Bluetooth Throttle Response Controller can be used in conjunction with common aftermarket OBD-II programmers and/or monitors such as: SCT, Diablosport, Hypertech, Superchips, Bully Dog, and Edge. If your vehicle has a custom tune, it is not
recommended to use the Pedal Commander Throttle Response Controller. A custom tune can improve the throttle response.Application.
This Pedal Commander Bluetooth Throttle Response Controller is specifically designed for use on 2015-2023 Jeep Renegade BU models.
- 2015 Jeep Renegade
- 2016 Jeep Renegade
- 2017 Jeep Renegade
- 2018 Jeep Renegade
- 2019 Jeep Renegade
- 2020 Jeep Renegade
- 2021 Jeep Renegade
- 2022 Jeep Renegade
- 2023 Jeep Renegade
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov