Talk to a 4Runner Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$12k Summer Sweepstakes! Enter Daily>
2 DAYS ONLY! Get $30 Off Shop Now

Find Offroad Storage for your 4Runner

Front Runner Rotopax Side and Top Mount Kit (Universal; Some Adaptation May Be Required)Find parts that fit my vehicle

Item TR20947
ExtremeTerrain no longer carries the Front Runner Rotopax Side and Top Mount Kit (Universal; Some Adaptation May Be Required). Please check out 2003-2009 Toyota 4Runner Exterior Styling for an updated selection.
Front Runner Rotopax Side and Top Mount Kit (Universal; Some Adaptation May Be Required)
Verify parts fit and get product recommendations.
4Runner Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Description, Q&A

    Description

    Description. Mount RotoPax Fuel, Water or Emergency/Storage Packs to the side or top of a Front Runner Slimline II Rack with this off-road tough Mounting Plate and adjustable tilt Side Mount Brackets. Rotopax brand Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used in conjunction and are SOLD SEPARATELY.

    Free up rack space and mount fuel and water to the side or top of a Slimline II Rack.

    The high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack.

    The Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96")) and tilt (12.5 degree increments up to 25 degrees) adjustable.

    Allows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle.

    Rotopax Rack Mounting Plate measures in at 480mm (18.9") L x 250mm (9.8") W x 20mm (0.8") H, weighs 1,58kg (3.5lbs).

    Both the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack.

    Installation hardware and fitting instructions included.

    PLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Questions & Answers

    10 More Questions