C4 Fabrication Overland Series Rear Bumper without Swing Arms; Black (14-24 4Runner w/o Blind Spot Monitoring)Find parts that fit my vehicle

Features
When the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.
Multiple Accessory Mounting Configurations available via Mounting Hole Patterns
Designed with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open
Anti-Rattle, Heavy Duty Swing-Out Latching System
Swing-Out fits up to a 35″ Tire.
Includes a license plate mount kit with light.
Retains camera functionality.
Single (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.
Maxtrax brand mounting pins recommended / RotoPax brand mount not included & required to use with our mount.
Our Rotopax/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.
All of our mounts can be adjusted vertically on our swing arms according to preference.
On Half Swing Bumper: Tire mount must be removed to bolt on other accessories.
Base bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.
Please Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.
Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust

Fitment
Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment
Compatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).
NOT Compatible with 2021+ BSM
NOT Compatible with Parking Sensors on some Models

Add-Ons
Optional Rotopax Mount
Optional Hi-Lift Jack Mount
Optional Jerry Can Holder
Optional Reverse Camera Mount
Optional Ham Antenna Bracket

The C4 5th Gen 4Runner Overland Series Rear Bumper is a full replacement, no-cut design for your 2010-2024 4Runner. It includes a license plate mount kit with light, all necessary hardware, and retains the camera functionality. Each swing out variation comes with a camp table, holes for CB antennas, and zip tie tabs for easy routing of wires.
Built with internal bracing throughout the main structure, the bumper resists twist and sag, even with fully loaded swing-outs. The swing-out arms are compatible with tires up to 35” and feature multiple mounting hole patterns to accommodate a variety of off-road accessories like jerry cans, hi-lift jack, and recovery gear. Heavy-duty latching systems are easy to operate and dramatically reduce swing-arm movement, outperforming other systems on the market.
The bumper’s mounting system allows for full adjustability in every direction, ensuring a perfect fit and even body lines. Lightweight steel filler panels attach below each taillight, eliminating gaps and completing the clean, custom look. The design is compatible with the C4 Summit hatch ladder and GOBI ladder (excluding TRD Pro GOBI).

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov