How to Install Putco LED Dome Light (07-18 Wrangler JK 2 Door) on your Jeep Wrangler

1. Carefully open the package using a box cutter or knife (Figure A) and ensure the lights are included and undamaged.

2. Using a plastic trim tool, pop the front of the light cover free (Figure B).

3. Using a plastic trim tool, pop the rear of the light cover free (Figure C).

4. Remove the light cover completely (Figure D).

5. Remove the interior light bulbs (Figure E).

Note: If having trouble removing bulbs, use a small flathead screwdriver to very gently help guide the bulbs out of the notches.

6. Place the new Putco LED light bulbs in each light (Figure F). 

7. Open a door to ensure each light is correctly placed and lights up (Figure G). 

8. Return light cover.

Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 04/19/2018.