Boosted Off-Road Performance. Conquer the roughest off-road terrains with ease with the help of this Teraflex 3.50-inch Sport S/T3 Suspension Lift Kit, which includes 2.1 Falcon Shocks. The increased ground clearance makes room for larger tires and helps protect the underbody from damage while you tackle obstacles. Meanwhile, the track bar bracket, control arm brackets, and sway bar links combine for excellent control and handling, stability, and maneuverability. Finally, this suspension lift kit also includes bump stop strike pads to supplement the Falcon shocks in protecting the suspension system.
Falcon 2.1 Series Monotube Shocks. These top-notch shock absorbers sport Falcon’s unique Volume Optimized Damping or VOD technology, which improves vehicle control while driving at low speeds. At the same time, these shocks also reduce your Jeep’s tendency to bottom out when driving at high speeds or when driving over uneven terrains.
Lifted Coil Springs. The significant 3.50-inch increase in ground clearance offers various benefits while off-roading. These include added protection for the underbody and chassis of your Jeep, as well as a smoother ride, even if you’re driving on bumpy roads. Your Jeep also becomes easier to maneuver over minor obstacles.
Front Track Bar Bracket. This suspension lift kit comes with a front track bar bracket, which helps manage alignment and steering issues with your Jeep. Among the most critical problems that a front track bar addresses are bump steering and suspension alignment. Overall steering control is also enhanced with the help of this particular component.
Front Control Arm Brackets. Together with the front track bar bracket, this suspension lift kit’s front control arm brackets help address issues with alignment and steering control. This component is also an important factor in enhancing driving stability.
Bump Stop Shims and Strike Pads. In order to provide sufficient room to accommodate up to 35- and 37-inch tires, Teraflex included a set of bump stop spacers with this suspension lift kit. In addition, there are also bump stop strike pads included in this suspension lift kit. These strike pads serve as supplemental shock absorbers, as they absorb excess energy when the suspension experiences extreme compression.
Longer Front and Rear Sway Bar Links. Also included in this suspension lift kit is a set of long sway bar links. The ones for the front measure 10.75 inches and those for the rear are 11.50 inches. These sway bar links help improve handling and reduce body roll when taking corners, turning or driving in a curve, and when going over large obstacles.
No-Drill, No-Weld Installation. There is no need for cutting, drilling, or welding to install this suspension lift kit to your Jeep. Simply use the required tools and the enclosed mounting hardware, and follow the instructions in the manual. You can accomplish installation in about 5 hours.
Covered by a Lifetime Structural Warranty. Teraflex suspension lift kits all come with a lifetime structural warranty that covers any workmanship and material defect. Kindly contact customer service if you have any questions regarding the terms and conditions and claiming procedures.
Application. This Teraflex 3.50-inch Sport S/T3 Suspension Lift Kit with 2.1 Falcon Shocks can be fitted on all 2018-2020 4-door models of the Jeep Wrangler JL.
Application Notes. Aftermarket wheels with at least 4.50 inches of backspacing are required before this suspension lift kit can be installed on Sport and Sahara models. Installing the 0.50-inch shims is also required prior to installing 35-inch tires to the Sport and Sahara models and 37-inch tires to the Rubicon model.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov