2-Inch Long Trunnion Bar Weight Distribution Hitch; 6,000 to 8,000 lb. (Universal; Some Adaptation May Be Required)

Reliable Weight Distribution. By using CURT’s Tacoma 2-Inch Long Trunnion Bar Weight Distribution Hitch, you can distribute a trailer’s weight to allow for more stable transportation. This hitch features a 2-Inch shank, which you can flip to create a rise or drop depending on your needs. The integrated brackets and lift handle allow you to leverage the springs as needed. This weight distribution system has a gross trailer weight of 6,000-8,000 Pounds and tongue weight of 600-800 Pounds, with the true maximum dependent on the rest of your towing setup.

Built for the Road. The forged steel spring bars used in the construction of this hitch are 30-5/8 Inches long. They offer plenty of vehicle clearance while also being tough enough to deflect debris and anything else that gets kicked up at them during your drive. You don’t have to worry about environmental toxins or the weather either, as the bars have a black powder-coated finish that protects them.

Direct Installation. This weight distribution hitch comes with everything needed to install it without modifying your vehicle. The mounting kit includes spring bars, a shank, hookup brackets, head, and pin and clip fastening system.

Protection for Life. CURT’s limited lifetime warranty protects you from manufacturing and material flaws. You also receive 1-year warranties on the parts and powder-coated finish.

Application. The Tacoma 2-Inch Long Trunnion Bar Weight Distribution Hitch is designed to install directly into 2-Inch hitch receivers.

Installation Difficulty. As this is part of your towing setup, moderate automotive knowledge is needed to fit install it safely. The part takes approximately less than an hour to fit install if you’re not counting the time required to fit it to your trailer to it.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov