- (1) Transfer case skid plate
Free Shipping on Orders Over $75. Details
$335.00 (each)FREE Shipping
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
Installation Time: (approx) 2 Hours
Difficulty Level:Light to Moderate mechanical skill required.
No questions about this product yet.Ask the First Question
Installation Time: Afternoon
August 10, 2016
This replaced the stock skid on our 2016 JKU Rubicon Hard Rock. It has a lot more coverage and is a lot thicker and stronger. I'd gladly buy it again. I do have to ding it one star because I had to slightly widen the hole where it tucks under the Synergy cross member and skid. It almost fit but it was causing the threads to bind I banged it into place a little but the other 3 holes that bolt to that cross member skid were lined up and the factory frame hole lined up, that last frame hole was just a little off. I also couldn't use the flush mount bolt as described for the rear frame hole but that may be a change in the 16s. It says to drill out the existing hole and retap larger. For the life of me I don't know why they just don't provide the next size down flush mount bolt. My factory hole is a clip essentially and if I attempted to drill and tap it there won't be much if any metal left. I used the stock bolt and I'll find a smaller flush mount bolt. This is a good piece though and it fits much better than some stuff I've bought from other brands.
Bang for your Buck 5