FREE 1 to 3-Day Delivery on Orders $119+ Details
Talk to a Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
How to Install Snyper LED Light Pillar Mounting Brackets (07-18 Wrangler JK) on your Jeep Wrangler
Installation Time
15 minutes
Tools Required
- 3/8” Ratchet
- Torx T40 Socket
- Supplied M8 Allen Key
- Utility Knife
- Torque Wrench
1. Locate and line up A-pillar gasket on backside of the mounting bracket. Pull off backing material and stick to the new bracket.
2. Locate and remove 5 T40 bolts in the bottom of the A pillar. Do not remove the bottom bolt unless cleaning under is desired.
3. Remove bottom bolt if cleaning is desired to prevent build-up and rusting.
4. Cut holes in the A-pillar gasket to allow insertion of the new bolts.
5. Align and install mounting bracket using the supplied M8 hex head cap screws and washers. Tighten to 15 ft-lbs. using torque wrench.
Installation Instructions Written by ExtremeTerrain Customer Michel Geske 04/28/2018.