Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $6,000 In Store Credit Enter Now

Rugged Ridge Rear Bumperettes; Black (87-06 Jeep Wrangler YJ & TJ)

Item J14578
ExtremeTerrain no longer carries the Rugged Ridge Rear Bumperettes; Black (87-06 Jeep Wrangler YJ & TJ). Please check out Jeep Rear Bumpers for an updated selection.
Call a Wrangler Enthusiast at 1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Rear Bumperette Pair
    • Steel
    • Gloss Black Powder Coat Finish
    • 7.3 lbs
    • 5 Year Limited Warranty
    • Fits 1987-2006 Jeep Wrangler YJ and TJ Models

    Description

    Construction. This bumperette from Rugged Ridge is made from high quality steel for long lasting reliability. The gloss black powder coat finish makes this bumperette look great but also increases its resistance to corrosion.

    Specs. The bumperette pair is 7.3 pounds, about 3.6 pounds for each bumperette.

    Accessories & More. This bumperette features a 5 year limited warranty provided by Omix-ADA.

    Application. Fits 1987-2006 Jeep Wrangler YJ and TJ Models.

    Freight Notes. Freight items can only be shipped within the continental 48 states, no expedited methods. What is freight shipping? Your Answers are Right Here!.

    Fitment:

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    4.3

    Customer Reviews (3)

    Write a Review

    Ratings Summary

    4.3 out of 5 overall rating from 3 customers

    Installation Time: Less than 1 Hour





    • November 08, 2018

      5 1992 Wrangler - DavidH Installation Time: Afternoon

      Jeep Bumperettes

      They were just what I wanted .but a little rough to install on a existing tow hitch . Tight work on the inside bolts and nuts hard to get off and on ,no fault of the bumperettes ! They look great !!

      Helpful (7)
    • August 24, 2018

      5 1995 Wrangler - ChristopherManu Installation Time: Less than 1 Hour

      Dautrs1car

      Bumpers were very easy to install.suggestion to weld stop tabs on nuts to make install easier, as I did.

      Helpful (7)
    • July 03, 2018

      3 1995 Wrangler - Brian Installation Time: Less than 1 Hour

      Not Gloss but Matte

      These bumperettes showed up, not gloss black like they are described as but matte black. They appeared to be well constructed and they were packaged very well for shipping; However, I sent them back as all the black on my jeep (step bars, front bumper, tire stop, etc.) is gloss and these would not match.

      Helpful (8)

    Questions & Answers (4 answers)

    4 Top Rated Questions

    I appreciate your answer to my question about the texture of the bumperette, however I would really like to know How thick they are? My originals are 3/16 inch, and did prevent damage to my frame when I was rear ended, I guess I want to know if these will do the same. Thank you for your time.

    • These should be the same thickness, and we would certainly expect that they would help to protect you from damage!

    Helpful (0)

    What is the thickness? And do you know where I can get them in Textured Black? My originals are textured, had a rear end accident and need to replace 1. If I have to replace both, How shiny are they? Thank You

    • Each bumperette is 11'' wide, 8'' deep at deepest point, and 8" from center to center of bolt holes. I am unsure of where you could purchase a textured pair of them, but they are more of a matte black than a gloss black and should not be too shiny. We do carry just one if you need that! https://www.extremeterrain.com/rugged-ridge-bumperette-yj-tj-120292.html

    Helpful (0)

    With the correct bolts/nuts, will the bumperettes work in conjunction with this hitch mount( https://www.extremeterrain.com/red-rock-4x4-hitch-black-yj-tj-j100179.html )?

    • We would suggest utilizing a rear bumper as opposed to just connecting these into the hitch mount as the hitch mount is not a replacement bumper.

    Helpful (0)

    What are the dimensions of the bumperettes?

    • Each bumperette is 11'' wide, 8'' deep at deepest point, and 8" from center to center of bolt holes.

    Helpful (0)
    Post Your Question

    Installation & What's in the Box

    What's in the Box

    • (2) Bumperettes
    • Hardware

    Tech Specs

        Related Wrangler Categories