Shop Our Holiday Gift Garage Shop Now
Talk to Wrangler Enthusiasts
1-844-887-6502
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping on Orders Over $75. Details

Omix-ADA Front Left Fender Flare (07-17 Wrangler JK)

Market Price $116.99 You Save 26% ($30.43)
Our Price

$86.56

FREE Shipping
  • Item J12204
  • MPN# 11609.11

In Stock Ships same business day. Choose options to add to cart

Get up to $200 Back

Features, Video & Details

  • Front Left Fender Flare
  • 51 Inches by 16 Inches by 14 Inches
  • Driver's Side Front Fender Flare
  • Virtually Indestructible and Durable
  • UV Treatment Prevents Fading and Cracking
  • Use Existing Hardware
  • UV Treated Thermoplastic
  • Bolt-On
  • 2007 - 2017 JK Wranglers and Wrangler Unlimited

Review & Installation Video

Review & Install Video

I'm Ryan from extremeterrain.com, and this is my review and installation of the Omix-ADA Fender Flare fitting all 2007 and up JKs. These are available individually as you see here, you can get each one of the corners separately, or you can get a kit of all four. Today we're gonna talk through the installation of these fender flares which is a very simple one out of three wrench installation. If you're just installing one as you see here, it will take you a little bit less than an hour, of course, the kit will be a little bit more, but we'll talk more about the install in a second. We're also gonna talk about the construction and a few of the features of these flares. These are going to be for those of you who have broken a single flare either on the road or off road, and are looking for a factory style replacement. Or maybe you have aftermarket fender flares on your Jeep now, but you're looking to get back to that factory style look. That's another reason to purchase a full kit of all four of these flares. These will look, feel, and fit just like a factory flare will. The only difference is they don't have that OEM price tag on them. These are going to be significantly less expensive than purchasing a set of four new flares from Mopar. However, they are still going to give you that factory style look and for all intents and purposes, these are a factory style flare. There is no difference to the naked eye. These are going to accept all of your factory lighting, they're going to attach in all of the same way as your factory flares, but again, just be less expensive. These flares are made of a UV treated thermoplastic and as you can see, they look just like a factory flare will. They're going to resist the fading and cracking that you can get from UV rays beating down on your flares constantly. So, whether you're replacing your flares because they are faded or because they're cracked, these are going to be an excellent option for you. As I said before, they do attach in much the same way as your factory flares will. However, these do not come with any hardware to attach them and chances are, when you remove your factory flare, whether you're doing it to install this one, or it was forcefully removed, the factory clips that hold the flare onto the body are not going to hold up. Those clips are really more of a one-time use clip, they generally break whenever you remove the flare. So, I would recommend picking up a new set of hardware when installing these. Now, those are the clips that go along the back side here. There are also some clips that hold the inner fender liner onto the fender flares itself across the front, and those are pins that can be re-used if you're careful when removing. So, to get these installed all you need to do is first remove whatever flare you currently have on the Jeep. If you have factory flares, you wanna give your turn signal a quarter-turn, get the socket out of the housing, unclip the wiring harness. And then push those pins along the front side with an awl or a nail set or a very small screwdriver. If you push the center of those clips in, they'll release, and again, you can reuse them. Once you have all of those removed, it's really just a matter of pulling the fender flare off again, you'll break some of those clips that hold it onto the body, but that's really the best way to get it removed. After that, you can remove any remnants of those clips that are in the body, install your new clips onto your fender flare, and snap the flare into place. Finally, you'll line up your inner fender liner with your new flare, and reuse those push pins or if you purchased new ones, use the factory style pins to attach the inner fender liner to your new fender flare. Of course before you do that, you can go ahead and bolt your turn signal in place and you're pretty much finished up. Again, this is a very simple installation. If you're not going from a factory flare, you're going from an aftermarket flare, the removal process might be a little bit different, but once you get those flares removed the installation is going to be just the same. One flare can probably be installed in under an hour. If you're doing a set of all four, it can probably take closer to two maybe a little bit over. But all you're going to need is traditional hand tools, maybe a trim removal tool to get the remnants of those clips out of the body, and a little bit of patience. This is something that anybody can do in their driveway. These flares come in at right around $80 a piece or a little over $200 for a set of four, which I think is an excellent price. These are going to be significantly less expensive than if you went directly to a dealership and tried to get an OEM set of fender flares. But as I said before, these are going to look, function, and install just like a factory set will, they'll just save you some money. Now, all of that being said, you can get some aftermarket flare kits that may have pocket style or a rivet style flare, they might be a flat flare. There are some other options that are out there that are right around the same price. So, if you're looking to upgrade your broken or faded flares and you want something that's a little bit different, there are some other options in the same price range. But, if you're looking for something that's going to be a factory style replacement, this is definitely going to be a good option. So, whether you're looking to replace a single factory flare that you broke either on the road or off road, or you're looking to swap in a whole set of all four factory style fender flares, either because yours are broken and cracked, or you're just looking to get back to that factory styling, this is going to be an option that will save you a lot of money off of going with an OEM fender flare. But it still gives you the look and the feel. So, that's my review of the Omix-ADA Fender Flares, fitting all 2007 and up JKs, that you can find right here at extremeterrain.com.

Design. When it’s time to replace a fender flare, only the best will do. This Omix-ADA fender flare fits the front driver’s side and is made from strong, resilient thermoplastic. It’s almost impossible to break or crack this material, which is why it’s the perfect choice for the rugged, off-road capable Wrangler. It’s also protected by a UV treatment that will help prevent sun-fading or cracking, and keeps the fender looking factory fresh for years to come. This is a factory style replacement that’s designed to look exactly like the original part.

Construction. Installation hardware is not included, but most owners can simply remove the old fender and use their existing hardware to install this one. These fender flares are created to pair up easily to factory mounting holes on each Jeep, but modified Jeeps, or those with extra trim, may require hole relocation. This product is covered by Omix-ADA’s generous limited warranty, so buyers can choose it with confidence.

Application. This driver's side front fender flare fits 2007 - 2017 JK Wranglers and Wrangler Unlimited

Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Details

What's in the Box
  • Driver's Front Fender Flare
Installation Info
Will it fit my Wrangler?
  • JK - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • JK Unlimited - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • JK Rubicon - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17

Most Helpful Reviews

5/5
Just like factory fenders

These fenders are just like the stock ones. Same look, feel, everything. Easy to install.

Helpful (1)

5/5
Nice

Fit like a glove. Needed to have it painted to fit jeep

Helpful (1)

Overall Rating 5 out of 5 stars
Read All 6 Reviews

Customer Photos

You Might Also Like

1 Questions / 1 Answers

Ask a Question

I'm looking for a stock looking set of fenders that are wider than stock by about (4") or so...The product description for Omix-ADA Fender Flaes is confusing. One part says these are stock fenders while another part says that the dimensions are (51"x12"x14") which are wider than stock which are about (10 1/4") wide. Can you measure the Omix pieces and give me a definitive answer about their size ?

garryv

  • The Omix-ADA Front Left Fender Flare is a stock replacement flare. The 51"x12"x14" dimensions are the shipping dimensions of the box.

    TerriB

Helpful (0)

More Products You Might Like

Customer Reviews (6) Write a Review

Overall Rating 5.0

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.833333 4.8
  • Appearance 5 5
  • Bang For Your Buck 4.5 4.5



  • 5/5

    Installation Time: Less than 1 Hour

    August 12, 2016

    Just like factory fenders

    These fenders are just like the stock ones. Same look, feel, everything. Easy to install.

    Unlimitedjones

    Year: 2015Submodel: Wrangler Unlimited

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 04, 2016

    Nice

    Fit like a glove. Needed to have it painted to fit jeep

    gulfwarvet94

    Year: 2016Submodel: Rubicon Unlimited

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 19, 2016

    OEM style front fender

    fender looks like OEM. Simple to install. Have no problem needing another!. As long as I break it having fun!

    4Fun

    Year: 2016Submodel: Wrangler Unlimited

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    March 23, 2015

    Great fit good quality plastic

    I'd definitely read and or review installation instructions prior to installation. You will also need to purchase fasteners to attach it to the body. It doesn't come with any. Still highly recommend!

    mmikecamel

    Year: 2011Independence, MO, USA

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    August 22, 2017

    Fender Replacement

    Replaced slightly damaged fender before lease turn-in. Prefect fit and fairly easy to do. Saved me damages on turn-in for a LOT lese money than dealer wanted to replace

    StephenC

    Year: 2015Submodel: Wrangler

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 29, 2017

    Excellent OEM Style Fender

    Much cheaper than dealer and exact fit and look. Easy install. Took less than 1hr. You do need the replacement clips (order separate) for proper instal.

    GregS

    Year: 2015Submodel: Rubicon

    Helpful (0)

Related Wrangler Categories