Win Two 2018 JL Wranglers! Enter Now
Talk to Wrangler Enthusiasts
1-844-887-6502
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping on Orders Over $75. Details

Omix-ADA Front Right Fender Flare (07-17 Wrangler JK)

Market Price $116.99 You Save 26% ($30.43)
Our Price

$86.56

FREE Shipping
  • Item J12205
  • MPN# 11609.10

In Stock Ships same business day. Choose options to add to cart

Get up to $200 Back

Features, Video & Details

  • Front Right Fender Flare
  • 51 Inches by 16 Inches by 13 Inches
  • Passenger's Side Front Fender Flare
  • Made from Virtually Unbreakable Material
  • Covered by a Generous Five-Year Limited Warranty
  • Use Existing Hardware
  • UV Treated Thermoplastic
  • Bolt-On
  • 2007 - 2012 JK Wranglers and Wrangler Unlimited

Review & Installation Video

Review & Install Video

I'm Ryan from extremeterrain.com, and this is my review and installation of the Omix-ADA Fender Flare fitting all 2007 and up JKs. These are available individually as you see here, you can get each one of the corners separately, or you can get a kit of all four. Today we're gonna talk through the installation of these fender flares which is a very simple one out of three wrench installation. If you're just installing one as you see here, it will take you a little bit less than an hour, of course, the kit will be a little bit more, but we'll talk more about the install in a second. We're also gonna talk about the construction and a few of the features of these flares. These are going to be for those of you who have broken a single flare either on the road or off road, and are looking for a factory style replacement. Or maybe you have aftermarket fender flares on your Jeep now, but you're looking to get back to that factory style look. That's another reason to purchase a full kit of all four of these flares. These will look, feel, and fit just like a factory flare will. The only difference is they don't have that OEM price tag on them. These are going to be significantly less expensive than purchasing a set of four new flares from Mopar. However, they are still going to give you that factory style look and for all intents and purposes, these are a factory style flare. There is no difference to the naked eye. These are going to accept all of your factory lighting, they're going to attach in all of the same way as your factory flares, but again, just be less expensive. These flares are made of a UV treated thermoplastic and as you can see, they look just like a factory flare will. They're going to resist the fading and cracking that you can get from UV rays beating down on your flares constantly. So, whether you're replacing your flares because they are faded or because they're cracked, these are going to be an excellent option for you. As I said before, they do attach in much the same way as your factory flares will. However, these do not come with any hardware to attach them and chances are, when you remove your factory flare, whether you're doing it to install this one, or it was forcefully removed, the factory clips that hold the flare onto the body are not going to hold up. Those clips are really more of a one-time use clip, they generally break whenever you remove the flare. So, I would recommend picking up a new set of hardware when installing these. Now, those are the clips that go along the back side here. There are also some clips that hold the inner fender liner onto the fender flares itself across the front, and those are pins that can be re-used if you're careful when removing. So, to get these installed all you need to do is first remove whatever flare you currently have on the Jeep. If you have factory flares, you wanna give your turn signal a quarter-turn, get the socket out of the housing, unclip the wiring harness. And then push those pins along the front side with an awl or a nail set or a very small screwdriver. If you push the center of those clips in, they'll release, and again, you can reuse them. Once you have all of those removed, it's really just a matter of pulling the fender flare off again, you'll break some of those clips that hold it onto the body, but that's really the best way to get it removed. After that, you can remove any remnants of those clips that are in the body, install your new clips onto your fender flare, and snap the flare into place. Finally, you'll line up your inner fender liner with your new flare, and reuse those push pins or if you purchased new ones, use the factory style pins to attach the inner fender liner to your new fender flare. Of course before you do that, you can go ahead and bolt your turn signal in place and you're pretty much finished up. Again, this is a very simple installation. If you're not going from a factory flare, you're going from an aftermarket flare, the removal process might be a little bit different, but once you get those flares removed the installation is going to be just the same. One flare can probably be installed in under an hour. If you're doing a set of all four, it can probably take closer to two maybe a little bit over. But all you're going to need is traditional hand tools, maybe a trim removal tool to get the remnants of those clips out of the body, and a little bit of patience. This is something that anybody can do in their driveway. These flares come in at right around $80 a piece or a little over $200 for a set of four, which I think is an excellent price. These are going to be significantly less expensive than if you went directly to a dealership and tried to get an OEM set of fender flares. But as I said before, these are going to look, function, and install just like a factory set will, they'll just save you some money. Now, all of that being said, you can get some aftermarket flare kits that may have pocket style or a rivet style flare, they might be a flat flare. There are some other options that are out there that are right around the same price. So, if you're looking to upgrade your broken or faded flares and you want something that's a little bit different, there are some other options in the same price range. But, if you're looking for something that's going to be a factory style replacement, this is definitely going to be a good option. So, whether you're looking to replace a single factory flare that you broke either on the road or off road, or you're looking to swap in a whole set of all four factory style fender flares, either because yours are broken and cracked, or you're just looking to get back to that factory styling, this is going to be an option that will save you a lot of money off of going with an OEM fender flare. But it still gives you the look and the feel. So, that's my review of the Omix-ADA Fender Flares, fitting all 2007 and up JKs, that you can find right here at extremeterrain.com.

Design. Whether replacing a fender due to damage, or to restore it to its original factory condition, this Omix-ADA right fender flare is the right choice. Treated with a UV treatment, it’s resistant to fading and sun-cracking, which helps it not only last - but look great doing so. The thermoplastic material is almost impossible to destruct, and resists cracking as well. It’s the perfect balance between the strength and vigor Jeep enthusiasts demand, and the flexibility that allows this fender to handle anything the terrain throws its way.

Construction. This product does not come with installation hardware, but most installers can simply remove the old fender and use its hardware to install this one. Omix-ADA has designed this piece to fit into factory mounted holes, though some mods may require hole relocation. A generous five-year limited warranty gives buyers the peace of mind that they’re buying a product that the manufacturer believes in.

Application. This passenger's side front fender flare fits 2007 - 2012 JK Wranglers and Wrangler Unlimited

Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Details

What's in the Box
  • Passenger's Front Fender Flare
Installation Info
Will it fit my Wrangler?
  • JK - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • JK Unlimited - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • JK Rubicon - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
I liked it it's your regular fender

I needed it cause I got into an accident and my other one was cracked it works really hard to get on none of the extra like prices came with it and in the accident I lost most of them so that was hard ...

Read More
Helpful (1)

5/5
Great fit good quality plastic

I'd definitely read and or review installation instructions prior to installation. You will also need to purchase fasteners to attach it to the body. It doesn't come with any. Still highly recommend!

Helpful (1)

Overall Rating 4.6 out of 5 stars
Read All 5 Reviews

Customer Photos (1) Submit Your Photo

View 1 Photo

You Might Also Like

2 Questions / 2 Answers

Ask a Question

Can this fender flare be painted to match the Wranglers paint job.

BerenB

  • Hello! These fender flares can be paint matched to your Wranglers paint by a professional!

    Doug P

Helpful (0)

Is this fender a matching replacement for the OEM bumper? I have a damaged front passenger side fender. Finish is black textured plastic.

Boydv

  • Hello, yes the Rugged Ridge Front Right Fender Flare (07-17 Wrangler JK) is a replacement for the original fender flare.

    XTNuno

Helpful (0)

More Products You Might Like

Customer Reviews (5) Write a Review

Overall Rating 4.6

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.6 4.6
  • Appearance 4.8 4.8
  • Bang For Your Buck 4.4 4.4



  • 5/5

    March 24, 2016

    I liked it it's your regular fender

    I needed it cause I got into an accident and my other one was cracked it works really hard to get on none of the extra like prices came with it and in the accident I lost most of them so that was hard but it looks the same fits the same so it's good enough for me

    steff

    Year: 2015Submodel: WranglerBrentwood, NY, USA

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    March 23, 2015

    Great fit good quality plastic

    I'd definitely read and or review installation instructions prior to installation. You will also need to purchase fasteners to attach it to the body. It doesn't come with any. Still highly recommend!

    mmikecamel

    Year: 2011Independence, MO, USA

    Helpful (1)

  • 3/5

    Installation Time: Less than 1 Hour

    July 11, 2017

    Fender flare

    Looks just like a mopar fender flare. It is textured black though. So if you need a painted one this isn't the one to get. Good band for your buck.

    BerenB

    Year: 2015Submodel: Rubicon

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 07, 2017

    Match to the Factory Model

    I had to order this due to my son closing the garage door and destroying it. I got a price from our local dealer and then looked this one up. I was a little worried it wouldn't match but to my surprise it was a perfect match to the factory model. Also a whole lot cheaper. Was easy to install. I bought the hardware kit as well and good thing I did cause you'll need it. Took less then a hour to install.

    CalebH

    Year: 2017Submodel: Wrangler

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    November 04, 2015

    Great high quality product!

    Extreme Terrain is a great company, with excellent customer service! Got a very huge box with the fender packed in extra plastic bags and it arrived in excellent shape! UPS delivered it to my front door! It is light weight and yet high quality and very strong! Installation time was about one hour, and I had never done this type of installation before! Looks great on my 2011 Jeep! Very happy with my new Fender! Price is excellent! Makes my Jeep look new, like a 2015, ha ha!

    Diana11

    Year: 2011Florida, USA

    Helpful (0)

Related Wrangler Categories