Rubicon Express 4 Inch Standard Lift Kit w/ Shocks (87-95 Jeep Wrangler YJ)

4 Inches of Ride Height. Sitting high and tall is one of the things that many off-road Jeep enthusiasts love. You too can enjoy the off road from a higher seating area when you install the Rubicon Express 4 in. Standard Lift Kit w/ Shocks. This kit allows you to boost your Jeep up four inches and you will be able to accommodate beefier tires that can take on the open road with ease. With a good warranty to back this kit, there is no reason why you shouldn’t invest in it.

Twin-Tube Shocks. You will receive four twin tube shocks with the Rubicon Express 4 in. Standard Lift Kit w/ Shocks. These shocks work to absorb impact and allow you to easily crawl over the rocks you want. You will not only have an enhanced suspension system, you will be able to enjoy every moment on the terrain due to comfort.

Included Leaf Springs. The Rubicon Express 4 in. Standard Lift Kit w/ Shocks comes with leaf springs that provide you with a smooth and comfortable ride. The springs absorb any impact that your Jeep may take in conjunction with your shocks.

Wobble-Free Ride. When you want your Jeep to be wobble-free on the highway, you will find that it is possible with the included front track bar bracket. The Rubicon Express 4 in. Standard Lift Kit w/ Shocks allows you to be in control of your Jeep and you will always feel as though your Jeep is stable, even off road or at higher speeds.

Professional Installation Recommended. It is important that you have a professional install the Rubicon Express 4 in. Standard Lift Kit w/ Shocks. This kit can be kind of tricky and unless you have mechanical experience, Rubicon Express suggests a professional. You can expect installation to take one day. All hardware needed is included in the kit.

Warranty. Limited lifetime warranty offered by Rubicon Express.

Application. 87-95 Jeep Wrangler (YJ)

Note. Vehicle will require alignment after kit is installed. Recommend using Drop Pitman arm RE2500 w/power, RE2504 manual steering. Recommend using SYE kit and C/V drive shaft. Rear pinion shims required if CV driveshaft used. System is not recommended to be combined with body lifts over 1" tall. All ride height increases are approximate and will vary due to vehicle specification (Engine size, factory options, trail equipment, etc.).

Fitment:

• 1987 Jeep Wrangler
• 1988 Jeep Wrangler
• 1989 Jeep Wrangler
• 1990 Jeep Wrangler
• 1991 Jeep Wrangler
• 1992 Jeep Wrangler
• 1993 Jeep Wrangler
• 1994 Jeep Wrangler
• 1995 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov