Get The Most From Your Jeep.
The Rough Country Dana 30 Front 4.56 Gears Ring and Pinion Kit is the ideal ring and pinion gear kit that helps you get the most out of your ’97 to ’06 Wrangler TJ. The higher gear ratio allows you to go rock crawling with ease by optimizing the performance of your driveshaft. This ring and pinion gear set is particularly helpful if you’ve installed a set of larger tires.
Reinvigorate Your Jeep’s Performance Through Re-Gearing.
Your factory gear ratio is optimized specifically to your stock tire size. Larger tires can certainly help with off-road performance by giving your Jeep better ground clearance, but this compromises gear ratio, resulting in a drivetrain that turns slower. By upgrading to a higher gear ratio, your drivetrain is re-optimized, so your engine can turn your larger wheels like they were stock. This puts less strain on your engine, and drivetrain, and actually improves fuel economy.
The Rough Country Dana 30 Front 4.56 Gears Ring and Pinion Kit are forged from 8620 steel for maximum durability. This ring gear and pinion set further undergoes heat treating, improving strength. Also, the gears of this ring and pinion set are smooth-finished enabling them run quieter and cooler than other ring and pinion gears.
Professional Installation Is Advised.
To properly install the Rough Country Dana 30 Front 4.56 Gears Ring and Pinion Kit, you will need a number of specialized tools, like a bearing press and puller, as well as precision tools like a dial indicator and micrometer. Extensive mechanical knowledge and skills, and several hours are also required. As such, an installation by a professional is highly recommended.
Includes a 10-Year Limited Warranty Coverage.
The Rough Country Dana 30 Front 4.56 Gears Ring and Pinion Kit include a 10-year limited warranty coverage against manufacturing defects. Please visit the manufacturer’s website for more details.
The Rough Country Dana 30 Front 4.56 Gears Ring and Pinion Kit fit all 1997 to 2006 Jeep Wrangler TJ models.
The Rough Country Dana 30 Front 4.56 Gears Ring and Pinion Kit are for use with Dana 30 low pinion axles only. This ring and pinion gear kit won’t fit Dana 30 high pinion axles.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov