(approx) 1 Hour
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 15, 2019
I bought this and it worked perfectly, looked great. The next morning I went to turn it on and nothing. Kept blowing fuses and it was wired correctly! So basically it's junk shop elsewhere!!!Helpful (0)
March 05, 2019
Good product I would purchase again for my jku when I begin that build this light works great and looks on my jeepHelpful (0)
December 21, 2018
Cheap, you get what you pay for
Doesnt even bring mounting screws! The build quality is sloppy.Helpful (7)
October 21, 2017
Great bar/easy install
The bar and brackets are an easy process, fishing the wiring is a little harder but total project was only 2 hours. I love the slim, low profile look of the single light bar and the light output is still intense. Does give you some wind noise at highway speeds though but all light bars do.Helpful (11)
October 10, 2017
Lower quality than expected
The replacement screws that came with the mounting brackets are the wrong size and don't fit I had to spend an additional $10 on proper sized screws. The two screws that hold the light bar to the bracket were also too short and needed to be replaced and the wire from the light bar down the side bracket to connect to the wiring harness does not fit under the bracket so you have to spot tie it to the bracket and it looks rather tacky. If the bracket was made just slightly differently the wires could fit under the bracket for a much neater installation and finally the wiring harness has power going to the switch inside the car which drains the battery so I had to rewire the white wire on the relay to a power point that is only on when the ignition switch is on to avoid the battery drain problem as I don't drive the car daily. With a few small improvements it could be a hugely better product. Also the light bar howls with wind noise when driving on the freeway, I wish they would have mentioned that in the product description. It could have only taken an hour if the right parts were included and product design was better but I spent an afternoon making it right and fixing all the issues that were fixable.Helpful (16)
September 11, 2017
Great Light Bar
Bought this light bar for my jeep wrangler unlimited and the installation was very easy and only took me about an hour. The bar looks great and is very bright, overall very happy with this purchase.Helpful (10)
August 03, 2017
Great love it really easy to install.really bright came professionaly packed and rapid delivery!Helpful (10)
June 24, 2017
Good light for the price
This was a replacement for a light that was stolen. I prefer the look of the single row of LED compared to the two rows which I had previously. It is still very bright with one fewer rowsHelpful (10)
March 16, 2017
This is a nice light at a nice price it looks good and appears very bright, I say appears as I haven't yet had an opportunity to try it under "field" conditions. It was supposed to come with the wiring harness but it didn't, a quick call and ET shipped me one. Easy to install with the harness. Running the wire from the light inside the car was the only difficulty.Helpful (10)
February 22, 2017
Bang for your Buck
Great product ! comes with very detailed instructions and with an Awesome look. Raxiom makes one of the best light bars i would have to say. Over the time i have owned many light bars and most of them were under 150$ BIGGEST MISTAKE GO FOR RAXIOM ITS THE BETTER WAY TO GO. For the price You cant beat this.Helpful (9)
I just put the Raxiom 50",straight,spot flood combo,double row,light bar on my 2015,4dr.Rubicon. I'm debating whether or not to power it up because of the extreme howling it makes at any speed above 15 mph..It is totally unacceptable .What remedy for the noise can you suggest?And I don't mean something like turning up the the stereo I've tried it.
You can use item J130439 or J116234 to quite down the light bar wind noise.
So this does fit the Wrangler JL?
This will fit the YJ, TJ, JK and JL models.
Where does the Raxiom 50 in. Slim LED Light Bar plug into. In other words what do i use to turn on the Light Bar
This light bar would need to be connected to a power source and a switch. This is not included, and you can find a kit that would work here: https://www.extremeterrain.com/raxiom-led-switch-kit-j100996.html
If buy another mount for this led bar will it fit on other ones or is it someone specific i need to buy? i looking to get this for my JL.
Does this combo with the light and mount bracket or just the light?
Item J105855 is for the 50" LED light bar only.
The Raxiom 50 in. Slim LED Light Bar has a spot/flood beam pattern, with the inner LEDs being designed for a spot pattern, and outer LED's set up for a flood pattern. This is fixed and not able to be changed.
The Raxiom 50 in. Slim LED Light Bar will use M8x1.25 hardware to secure the light to a bracket.
We have had some reports from current owners that the Raxiom 50 in. Slim LED Light Bar does create some wind noises while driving.
Unfortunately there is not a published lumen rating from the manufacturer for this Raxiom 50 in. Slim LED Light Bar, however we estimate this to be in the 10,000-12,000 lumen range.
Hello, you will be able to use any 50" Light Bar Mount for that Light Bar, like this one for example: http://www.extremeterrain.com/off-camber-fab-formed-windshield-single-light-50in-0715.html
(approx) 1 Hour
Simple installation for anyone.
What's in the Box