(approx) 30 Minutes
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 22, 2020
get what you pay for...
Get ready to modify everything to make it fit. I honestly don't know where to start... The mounting bracket doesn't conform to the light at all, there's spring memory in the steel, so no matter how much you tighten the mount it will always move. I can't say if this is expected or not since no instructions of any kind are included in the box. Very poor design, one of the two lights has a mind of its own, it can't decide if it's going to work from home day to the other. I've even hard wired it to make sure there were no switching issues. It will randomly work/not work. The bodies of these lights are a cheap aluminum/alloy of some kind, they are very brittle, you must handle these with care, I expect the next hail storm to destroy these if a trip down the highway doesn't first. I'd be surprised if they survive subermsion.Helpful (0)
December 24, 2019
I purchased 2 of these lights a few weeks back to use as reverse lights. They're super bright and much smaller than typical cubes. I mounted them by welding the brackets on to my rear bumper instead of drilling and bolting them on. I wired them to turn on and off with the stock reverse lights and also with a switch via a relay by wiring both of these inputs to the same pin on the relay. They work very well, they haven't fogged up after direct pressure washing, and the coating seems very durable. The quality is MUCH better than cheap Chinese lights. I'll probably buy another set.Helpful (1)
October 17, 2019
Cannot withstand a car wash
This (very expensive) single square LED light isn't waterproof at all! First time I washed my Jeep (manually, no power jets involved) it started malfunctioning. Now it flickers from time to time.Helpful (3)
May 16, 2019
A little difficult to install. But a rubber hammer helps!Helpful (1)
April 16, 2019
Raxion 7.5 inch rectangular lights
Raxion 7.5 inch rectangular lights are nice looking and well-designed. I ordered them to go with a barricade light bar and although the light bar was a single Mount application, I found a way to mount 7.5 in lights and they look great.Helpful (1)
March 05, 2019
The price is reasonable, easy to install, and look great on my black rubicon! I haven't trail experienced, look forward to do so. Installation took me a little longer, I do the extras to route wiring, secured away for future installs.Helpful (2)
November 12, 2018
The light is one of the best I received
Great light the best light I have bought to date. Was super easy to install took almost no time at all go it in in about 45 to an hour. And it has several modes. Pretty cool for sure.Helpful (7)
November 02, 2018
Alway love the products I purchase
Never a problem or issue. Easy to order and always know where it it. My ride will be the best..Helpful (7)
October 29, 2018
I upgraded my factory headlights to the Axial LED black daymaker headlights and decided to upgrade the fog lights too. These look great and are super bright. The lights themselves were easy to install. I saw a few people say they wired these directly to the OEM fog light harnesses but didn't want to risk them not working properly so I purchased the Rugged Ridge harness with a switch for two off-road fog lights.Helpful (8)
September 20, 2018
Great Little Lights!
Great lights for the price! Puts off a good amount of light for their size. They give the Jeep a really clean look.Helpful (7)
Is it possible to hook these up to the factory foglight hookups? I had factory LED fog lights, but the aftermarket bumper I bought does not have provisions for factory lights. So I was hoping to use these and mount them to the new bumper while utilizing the factory wiring harness, meaning I don't have to do any major rewiring. Will this work or will the draw be too much and will I need a relay?
The Raxiom 3 in. Square LED Light would not be able to be used with the OEM wiring, and a separate switch/harness would be required to prevent issues.
Is it a single light, or pair?
I have a Congo pro roof rack by Kargo Master Safari and I would like to mount these in the A-pillar area, are any brackets that would allow me to attach these to the roof rack since the front of the rack is bolted to the A-pillar?
My state requires that they be covered when not off-road, can you recommend a cover for these lights?
At this time we do not offer a cover for these lights.
Can these be used for highway on road driving or just off road trail?
These are designed to be used off-roading.
The Raxiom 3 in. Square LED Light have three 4 watt LED's each, giving them 12 watts per light (or 24 for the set)
Hello, you will need to buy a wiring harness for this, this would be a good option: http://www.extremeterrain.com/raxiom-led-switch-kit-j100996.html
These lights are suitable for use where you need them and could easily be spliced into your backup lights. You may need to check with your local law enforcement to see if they have any regulations on off road light covers or limitations on reverse light brightness.
(approx) 30 Minutes
Simple installation for anyone.