Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
Everyday 8:30AM EST - 11:00PM EST
Win Any Lift Kit For Your Jeep! Enter Daily

PIAA RF Series 10 In. LED Light Bar - Fog Beam

Market Price $376.49 You Save 10% ($37.34)
Our Price

$339.15 (kit)

FREE Shipping

  • Item J103389
  • MPN# 7210

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Choose options to add to cart.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • 10 Inch LED Fog Light Bar
    • Reflector Facing Technology
    • 6000K Color Temperature
    • Modular Design
    • SAE Compliant Long Range Beam
    • Low Power Draw
    • Includes Switch, Relay and Wiring Harness
    • For All 1987-2018 Jeep Wrangler Models
    Fog Beam LED Light Bar. The PIAA RF Series 10-inch LED Light Bar is equipped with Reflector Facing Technology. This enables the LED light bar to fill in the dark areas left by the low beams of your rig for a safer and more comfortable driving experience. The high-powered LED bulbs in this kit are rated at 6000k for a whiter and brighter beam of light. This will also give your Jeep a modern and cool vibe.

    Built for the Extreme. The PIAA RF Series 10-inch LED Light Bar is built to withstand extreme off-road use. Only the finest cast aluminum is utilized for the housing and this gives the light bar a lightweight and strong construction. The 8 LED bulbs are covered and sealed by a premium grade polycarbonate lens. This kit is waterproof, shockproof, and is impervious to rust and corrosion.

    Hassle-Free Installation. The PIAA RF Series 10-inch LED Light Bar comes with the necessary mounting brackets and wiring harness. You can install the light bar and connect the wiring in less than an hour using a basic socket set and a screwdriver. The kit even comes with a switch and a relay for a hassle-free install.

    Wide Area Beam. This PIAA 10" LED Light Bar features a fog beam lens that spreads the beam horizontally as opposed to focusing it straight ahead. This provides excellent illumination of obstacles and brush to the side of the vehicle, with forward visibility limited in comparison to a regular driving beam LED light bar. Placing this RF Series Fog Beam 10" LED Light Bar closer to the ground will provide optimal results.

    Application. The RF Series 10 Inch LED Light Bar Fog Beam Kit is designed for use on all 1987-2018 Jeep Wrangler YJ, TJ, JK and JL models.

    CA Residents: Warning: California's Proposition 65

    What's in the Box
    • (1) RF Series LED Light Bar
    • Mounting Brackets
    • Wiring Harness
    • Relay
    • Switch
    Tech Specs

    You Might Also Like

    Customer Photos

    More Products You Might Like

    Questions & Answers (1)

    1 Top Rated Question

    Is this road legal? If installed lower on the bumper, could you use to augment the poor headlights on the wrangler?

    • Hello, you would have to check if your state allows for lights to be mounted above the headlights without being covered when driving on-road. Some states require that any lights mounted above the headlights will need to be covered. If allowed in your state, these will definitely be an improvement over the stock headlights.

    Helpful (0)
    Post Your Question

    Customer Reviews (1) Write a Review

    Overall Rating 4

    out of 5 stars

    Installation Time:Less than 1 Hour

    • Brightness 4 4
    • Fit 5 5
    • Appearance 5 5
    • Bang For Your Buck 4 4

    • 4/5

      Installation Time: Less than 1 Hour

      December 10, 2015

      Review from PIAA RF Series 10 in. LED Light Bar - Driving Beam

      Does the job right!

      Mounted the 10" light-bar to the hood about 2" from the top end of the hood. For a 10" light-bar this thing illuminates very well! With the right set of tools and decent knowledge of the Jeeps wire harness, this could be a 30 min install. It took me close to an hour because I was struggling with mounting holes on the underside of the hood. If you really need to light up the trails at night I would recommend connecting 2 of these light bars together! Oh and don't accidently connect the switches power (hot, white/red) wire to the horns hot wire for a power source... Ooops! Connect it either back to the battery, use a fuse adapter, or connect it to the headlight harness. FYI: Using the headlight harness only allows the light to function when the headlights are on. All-in-all it is a very nice looking low-profile hood-mounted light-bar that illuminates very well for its size.


      Year: 2015Simi Valley, CA, USA

      Helpful (3)

    Related Wrangler Categories