Free Shipping on Orders Over $75. Details

Talk to Wrangler Enthusiasts
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Wrangler! Enter daily!

Olympic 4x4 Front Bumper Winch Mount - Textured Black (07-20 Jeep Wrangler JK & JL)

ExtremeTerrain no longer carries the Olympic 4x4 Front Bumper Winch Mount - Textured Black (07-20 Jeep Wrangler JK & JL). Please check out 2007-2018 Jeep Wrangler JK Winch Mounting Plates for an updated selection.

Features & Details

  • Engineered for Demanding Applications
  • Factory Fog Lights Must be Relocated
  • Made in the USA
  • Textured Black Powder Coating
  • Fits 2007-2020 Jeep Wrangler JK and JLs
Components You Can Rely On. The Olympic 4x4 Front Bumper Winch Mount is designed to work flawlessly with your Jeep Wrangler JK and JL. It sets the winch in a position that maintains airflow to radiator. Olympic engineers develop all their off-road add-ons to fit and work perfectly with your vehicle. Invest in an Olympic 4x4 Front Bumper Winch Mount for your Jeep, and make an awesome ride that much better.

Exclusively for the Jeep JK and JL. The Olympic 4x4 Front Bumper Winch Mount rests comfortably between the Jeep JK and JL frame horns. The location is the most secure possible installation point on the front of the vehicle. This winch mount will hold steadfast for your toughest tasks whether you're pulling a fellow off-roader out of a rut or moving a boat into the water. The Olympic 4x4 Front Bumper Winch Mount will hold your winch firmly in place so that you can do what needs to be done.

Plenty of Options to Boot. The Olympic 4x4 Front Bumper Winch Mount pairs with Olympic 4x4 Boa Bumpers to give your Jeep a look that means business. You can also install Olympic 4x4 D Ring Shackle mounts for even more utility. They offer many components that make your off-road experience safe and more enjoyable. In fact, browse the entire line of Olympic 4x4 off-road components and you’re sure to find an Olympic 4x4 mod that’s just right for you.

Warranty. Olympic 4x4 covers the Front Bumper Winch Mount with a one-year limited warranty. The agreement applies to the original equipment buyer.

Application. The Olympic 4x4 Textured Black Front Bumper Winch Mount fits 2007-2020 Jeep Wrangler JK and JL.

Depending on manufacturer's availability, this item may ship within 3-5 business days. You will be notified of any delays in manufacturing that surpass this timeframe.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) Winch Mount
  • Installation Hardware
Installation Info
Tech Specs
Will it fit my Wrangler?
  • JK Rubicon 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
  • JK Rubicon 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
  • JK Wrangler 2 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
  • JK Wrangler 4 Door - 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18
  • JL Rubicon 2 Door - 18, 19, 20
  • JL Rubicon 4 Door - 18, 19, 20
  • JL Wrangler 2 Door - 18, 19, 20
  • JL Wrangler 4 Door - 18, 19, 20

    Customer Photos (2) Submit Your Photo

    View All 2 Photos

      Questions & Answers (4)

      4 Top Rated Questions

      I received this as a gift and also with a barricade 12,000 lb winch. Will this winch work with this mounting plate? Also can I use my factory bumper or will I need to purchase a different bumper?

      • The Olympic 4x4 Front Bumper Winch Mount will be compatible with the Barricade 12,000LB Winch. Fitment can be achieved with the OEM front bumper, however the bumper will need to be trimmed to accommodate the winch.

      Helpful (2)

      Will this bracket work with the RUGCEL WINCH Waterproof IP68 Offroad winch? Thanks

      • The Olympic 4x4 Front Bumper Winch Mount will work with any winch that features a standard bolt pattern. Olympic confirms fitment with Mile Marker, Super Winch, Ramsey and Warn winches.

      Helpful (0)

      Will this work with the Rugged Ridge Heavy Duty 8,500 lb. Winch on a stock bumper?

      • Fitment can be achieved with the OEM front bumper, however, the bumper will need to be trimmed to accommodate the winch.

      Helpful (0)

      Hello! Will the SmittyBilt 97495 XRC-9.5 Gen2 winch fit with this mount?

      • This will work with that winch yes.

      Helpful (0)
      Post Your Question

        Customer Reviews (8) Write a Review

        Overall Rating 3.8

        out of 5 stars

        Installation Time:Afternoon

        • Pulling Power 5 5
        • Fit 3.625 3.6
        • Appearance 5 5
        • Bang For Your Buck 4 4



        • 5/5

          Installation Time: Full Day

          February 21, 2018

          Great fit!

          I used this winch mount to install a Warn VR8 on my stock JK bumper and it was a great fit! This was definitely a custom job, so it took a FULL day, but the mount was an easy bolt on.

          HeatherL

          Year: 2017Submodel: Wrangler

          Helpful (12)

        • 4/5

          Installation Time: Afternoon

          September 28, 2017

          Fits tight

          The installation was straight forward but there are a few issues bottom L bracket bolt heads don't fit with stock tow hooks with out some cutting. Also ran into an issue with the LT frame sleeve not fitting a few pulls with a slide hammer make it fit. Other wise seams strong and good construction.

          ChetK

          Year: 2008Submodel: Wrangler

          Helpful (11)

        • 2/5

          March 25, 2017

          Lousy fit and directions

          I'm goimg to try taking EVERYTHING apart and starting over, my initial installation went poorly. Right off the bat, the fram sleeves were too long- needing 1/16 or more talen off to fit in the frame. There are many interferences some bolts will prevent you from getting a socket on another bolt, forving you to backtrack, a lot. The bolt holes for the bottom of the bumper don't have enough clearance to keep a socket on the bolt or the head of the carriage bolts that come with the bumper. I'm hoping that be starting from scratch, I can line things up differently - but by the time you find this out, you have a 75 lb winch on the plate getting in your way.

          Caulairdis

          Year: 2012Submodel: Wrangler

          Helpful (10)

        • 1/5

          March 13, 2017

          Will not work for 2016 JK

          This part by Olympic is not a direct bolt on for a 2016 Jeep JK. A relocation bracket for the brake vaccum pump is needed and the pump has to be moved to under the hood. If u already have an Spod installed or hope to there is no room to relocate it anyway. Buy a bumper with a built in winch plate and avoid the aggravation.

          JohnM

          Year: 2016Submodel: Wrangler

          Helpful (10)

        • 4/5

          June 23, 2016

          Olympic Winch Plate

          This is a great little plate if you're not looking to spend crazy loot. The fit was pretty good. The L bracket bolt holes aren't perfectly aligned, but doable. I had to file one of the sleeves that fits inside of the frame down a bit, but that was no biggie. I'm using the original tow hooks, so the inside bottom nut will not be able to be used due to the supplied L bracket bolt head. All in all, it's a great deal for this product. It nestles my xrc8500 perfectly between the frame rails. Oh, you'll first have to remove the winch prior to taking off your grill if you're so inclined to do so.

          Mike

          Year: 2008Submodel: Rubicon Unlimited

          Helpful (11)

        • 4/5

          March 25, 2016

          A solid winch mount

          Look & Feel: the metal all feels very solid, powder coat is consistent Install: Straight forward directions and simple construction make it easy All in all, this is a very good product and works perfectly with my Triple hoop Boa Bumper.

          SnakeEyesJK

          Year: 2015Submodel: Wrangler UnlimitedOmaha, NE, USA

          Helpful (10)

        • 5/5

          March 11, 2016

          Olympic 4x4 Products Front Bumper Winch Mount

          Fits as expected in JK on Olympic Boa bumper. No surprises, great product. Extreme Terrain had the best price, and shipping was very fast too.

          rob31

          Year: 2016Submodel: Wrangler UnlimitedAtlanta, GA, USA

          Helpful (11)

        • 5/5

          February 15, 2016

          Easy Install

          I used this Winch mount to mount a 10,000lb Traveler Winch into a custom made bumper, on my 2010 JK. It worked perfect. I've used the winch to pull out a rhinoceros who was stuck in the mud, and I've thrown my winch cable over a cliff to help pull up a T-Rex (cause those little tiny arms aren't made for rock climbing) and both times this mount securely held the winch in place.

          BigJohnJK

          Year: 2010Hawthorne, FL 32640, USA

          Helpful (11)

        Related Wrangler Categories